Sanyo CD-RW880 owner manual Manual track division, Input Monitoring

Page 17

6Press the PLAY or the PAUSE button to start recording.

7Play the source to be recorded.

When the playback of the source has been finished, press the STOP button to stop recording.

<The STANDBY/ON button doesn’t work during recording.

To stop recording

Press the STOP button (H) to stop recording.

To suspend recording temporarily (pause mode)

Press the PAUSE button (J). “WAITING” briefly appears on the display, and the recording is paused.

To restart recording, press the PLAY button (y) or the PAUSE button (J).

<You cannot restart recording while “WAITING” is displayed.

<Remember that every time recording is paused or stopped, a new track number will always be assigned. It is not possible to record in two “stages” within one track.

Sampling Rate Converter

This unit incorporates a sampling rate converter so that it can record digital signals sampled at 48 kHz or 32 kHz by converting the sampling frequency into 44.1 kHz.

Manual track division

It is possible to divide the recording into tracks while recording.

While recording is taking place, press the RECORD button. The current track number will be incremented by one.

<Manual track division is possible regardless of the AUTO/MANUAL setting.

<A track cannot be less than four seconds in length. The RECORD button will not work if it is pressed within four seconds from the beginning of a track.

Input Monitoring

To monitor the input signal

When there is no recordable disc in the unit, press the RECORD button (when there is a recordable disc in the unit, pressing the RECORD button will enter record pause mode).

The word MONITOR appears on the display to show that the output signal is an echo of the input signals. The meters show the current input level.

Exit the monitor mode by pressing the STOP button.

17

ENGLISH

Page 16 Page 18
Image 17
Page 16 Page 18
Contents CD-RW880 Important Safety Instructions Type SF-W36FR Manufacturer Laser output For U.S.ABefore using the unit ContentsConnections AC Power CordAnalog IN/OUT jacks Digital in terminalCD-RCD-RW DiscsBattery Installation Remote Control UnitAbout CD-R and CD-RW discs FinalizingO N M L K J Unit Functions and Remote ControlOPEN/CLOSE PowerMusic Skip Pause JCD-R Listening to a CDCD-RW CD-R no TOCTo suspend playback temporarily pause mode Standby modeTo stop playbacks To skip to the next or a previous trackTime Display Direct PlaybackShuffle Playback Repeat Repeat PlaybackTo repeat a designated section Repeat ALL Repeat All the TracksPress the numeric button to select a track Press the Program button in the stop modeProgrammed Playback Before Recording Load a recordable CD-R or CD-RW disc into the unit RecordingDigital Optical Analog AnalogInput Monitoring Manual track divisionTrack -60, -50, -40 or -30 dB Automatic Track DivisionTo start synchronous recording Synchronous RecordingSync ALL SyncPress the Play y button to start finalizing FinalizeErase and the number of the last track recorded on the disc Erase or Unfinalize a CD-RWErase Disc RefreshMaintenance TroubleshootingCD Recorder Beware of condensationError Messages SpecificationsMessages MessagesAvant l’utilisation SommaireAvertissement Quand Vous Déplacez CET L’APPAREILPrises d’entrée et sorties Analog IN/OUT RaccordementSortie Digital OUT Cordon d’alimentation ACDisques Remarques concernant les disques compacts CD-R et CD-RW Boîtier de télécommandeFinalisation Mise en place des pilesNomenclatures des controles Affichage Plateau porte-disque Capteur de télécommandeTouches numériques RemarqueÉcoute de CD Appuyez sur l’interrupteur PowerAppuyez sur la touche OPEN/CLOSE L pour fermer le tiroir Appuyez sur la touche Play y pour engendrer la lecturePour suspendre la lecture momentanément mode pause Mode veillePour arrêter la lecture Pour sauter au morceau suivant ou précédantAffichage du temps Lecture DirecteLecture aléatoire Répétition A-B Lecture répétéeRépétition d’une section désignée Repeat ALL Répétition de tout le disqueLecture Programmée En mode arrêt, appuyez sur la touche ProgramPour contrôler l’ordre programmé Pour ajouter un morceau à la fin du programmePour enlever un morceau de la liste programmée Avant d’enregistrerPour effacer la liste programmée Système de gestion de copie en sérieAppuyer sur la touche Record EnregistrementContrôle d’entrée Division manuelle de morceauTrack -60, -50, -40 ou -30 dB Division automatique de morceauPour démarrer l’enregistrement synchronisé Enregistrement synchroniséAppuyez sur la touche Play y pour commencer la finalisation FinalisationEffacement ou dé-finalisation d’un CD-RW Lecteur CD DépannageMise en garde sur la condensation EntretienSpécifications Accessoires standardAffichage des erreurs FS 441K, FS 32K ou FS 48KTeac Corporation

CD-RW880 specifications

The Sanyo CD-RW880 is a well-regarded audio device that embodies the transition from analog to digital media. As a versatile CD recorder, it captures both the nostalgia of traditional CD playback and the conveniences of modern digital recording technology. Designed for music enthusiasts and professionals alike, the CD-RW880 features a range of specifications that enhance its performance and usability.

One of the standout features of the Sanyo CD-RW880 is its ability to record onto CD-R and CD-RW discs. This flexibility allows users to create custom compilations and backup their favorite tracks with ease. The device supports a range of recording speeds, which includes options for both high-speed recording and standard speeds that ensure optimal quality. The capability to erase and re-record on CD-RW media further distinguishes it from standard CD players, providing a convenient and practical solution for digital music management.

The CD-RW880 employs advanced digital signal processing (DSP) technology, which plays a crucial role in maintaining audio fidelity during both playback and recording. It features a built-in A/D converter that ensures high-quality sound reproduction while minimizing noise and distortion. With a signal-to-noise ratio that meets professional standards, users can expect clear and accurate audio playback, whether they are recording live performances or transferring existing CDs.

Additionally, the Sanyo CD-RW880 is equipped with a user-friendly interface that makes navigation intuitive. The front panel includes dedicated buttons for recording, play, pause, and track selection, providing a seamless experience for users of all skill levels. The inclusion of a LCD display gives users quick access to important information such as track number, recording time, and remaining space on the disc.

Another noteworthy characteristic is the device's compatibility with both audio and data CDs, allowing it to function not just as an audio recorder but also as a versatile media player. This feature opens up possibilities for creating data backups and archiving important files onto CD format, which can be a useful addition for both personal and professional uses.

In summary, the Sanyo CD-RW880 is a multifunctional CD recorder that appeals to a broad audience from casual music lovers to professionals in the industry. With its solid recording capabilities, superior audio quality, and user-centric design, this device stands as a reliable choice for anyone looking to bridge the gap between analog sound and digital convenience. Whether for creating custom playlists, transferring music, or archiving precious audio content, the CD-RW880 continues to be a valuable tool in an increasingly digital world.
Top Page Image Contents