Panasonic DMR-E75V Set up to match your TV and remote control, Selecting TV type, TV operation

Before Use

STEP 4 Set up to match your TV and remote control

∫Selecting TV type

You do not have to change the setting when connected to a 4:3 standard aspect TV that is not compatible with progressive output. (l 63)

Preparation

≥Press [DVD].

[1]While stopped

Press [FUNCTIONS]. (l 47)

[2]Select “SETUP” with [3, 4, 2, 1] and press [ENTER].

[3]Select “TV Screen” with [3, 4] and press [2, 1].

[4]Select “TV Type” with [3, 4] and press [ENTER].

SETUP	TV Type
	Aspect 4:3 & 480I
Channel	Aspect 4:3 & 480P
	Aspect 16:9 & 480I
Set Up
	Aspect 16:9 & 480P
Disc
Video
Audio
Display
TV Screen

≥Aspect 4:3/Aspect 16:9:

	4:3		16:9
4:3 standard aspect TV		16:9 widescreen TV

≥480P/480I:

Select “480P” if the TV is compatible with progressive output.

[5]Use [3, 4] to select the item and press [ENTER].

∫TV operation

You can configure the remote control TV operation buttons to turn the TV on/off, change the TV input mode, select the TV channel and change the TV volume.

Point the remote control at the TV

While pressing [Í POWER TV], enter the code using the numeric buttons.

e.g., 01: press [0] ) [1].

Manufacturer and Code No.

Panasonic		PHILIPS (RC-5)	03
National	01, 02	RCA	05
QUASAR
		SAMSUNG	14, 18, 19
FISHER	10	SANYO	10
GE	05	SHARP	06, 07
GOLDSTAR	15, 16, 17	SONY	08
HITACHI	12	SYLVANIA	03
JVC	11	THOMSON	05
LG	15, 16, 17	TOSHIBA	09
MAGNAVOX	03	ZENITH	04
MITSUBISHI	13

Test by turning on the TV and changing channels. Repeat the procedure until you find the code that allows correct operation.

≥If your TV brand is not listed or if the code listed for your TV does not allow control of your TV, this remote control is not compatible with your TV.

∫When other Panasonic products respond to this remote control

Change the remote control code on the main unit and on the remote control (the two must match) if you place other Panasonic products close together.

Use “1”, the factory set code, under normal circumstances.

Preparation

≥Press [DVD].

[1]While stopped

Press [FUNCTIONS]. (l 47)

[2]Select “SETUP” with [3, 4, 2, 1] and press [ENTER].

[3]Select “Set Up” with [3, 4] and press [2, 1].

[4]Select “Remote Control Code” with [3, 4] and press [ENTER].

[5]Use [3, 4] to select the code (1, 2, or 3) and

press [ENTER].

The code on the unit has been set.

[6]While pressing [ENTER], press and hold for about 2 seconds the numeric button ([1], [2] or [3]) corresponding to the code you selected in

step 5.

The code on the remote control has been set.

[7]Press [ENTER].

∫When the following indicator appears on the unit’s display

The unit’s remote control code

Change the code on the remote control to match the main unit’s (l step 6).

∫To return to the previous screen

Press [RETURN].

∫When you are finished

Press [RETURN].

17