Panasonic DMR-E75V Recording from an external device, Input Select, Ch, W Dvd Rec

Advanced Operations DVD VHS

Recording from an external device

When connecting to the L2 input terminals on the front of the unit

≥You can also connect to the L1 input terminals on the rear of the unit.

Before connecting any cables, first make sure that the power for both units is off. Then, after connecting cables, turn on both units.

Note

≥When recording using this unit’s input terminals, only the sound received at the time of recording will be recorded. As long as secondary audio that is recorded on the media in the external device is not output to the unit in play, it is not recorded.

≥If the audio output of the other equipment is monaural, connect to L/ MONO. (Both left and right channels are recorded when connected

through L/MONO.)

≥The S-VIDEO terminal achieves a more vivid picture than the VIDEO terminal.

POWER
Í/I
EJECT
PULL OPEN VHS	DVD
VIDEO IN	L/MONO – AUDIO IN – R	CH
	L2	S-VIDEO IN

	(1)	Audio/Video cable (not supplied)
		A Yellow (VIDEO)
	(2)	B White (L)
		C Red (R)
(1)	(2)	S video cable (not supplied)
	(3)	Other playback equipment

(3)

Preparation

DVD [RAM] [DVD-R]

≥Release protection (disc l 30, cartridge l 18). [RAM] ≥Press [DVD].

VHS

≥Insert a video cassette with an intact erasure prevention tab. (l 48) ≥Press [VHS].

[1]Press [REC MODE] to select the recording mode.

(DVDl 27, VHSl 51) ≥DVD [RAM] [DVD-R]

-It is also possible to perform Flexible Recording (FR). (l 27)

[2]While stopped

Press [CH, W, X] or [INPUT SELECT] to select the input channel.

≥Select L1 or L2.

	DVD/VHS POWER	TV
		POWER
INPUT SELECT	INPUT SELECT	TV/VIDEO	CH	VOLUME
	DVD/VHS
	OUTPUT	VHS		DVD
			TRACKING/V-LOCK
	SKIP/INDEX		SLOW/
			REW SEARCH FF
				AUDIO
∫				PLAY
	CANCEL/RESET		VCR Pl
	PROG/CHECK	DISPLAY	STATUS	TIME SLIP
µ, VHS REC	DIRECT NAVIGATOR			FUNCTIONS
	VHS REC	REC MODE	DVD REC	ADD/DLT
REC MODE	TOP MENU			VHS MENU
	CHAPTER	DVD ERASE	DUBBING
			VHS	DVD
	JET REW

VHS

DVD

CH, W, X

1

;

µ, DVD REC

1DVD

[3]Start play on the other equipment.

[4]Press [¥, DVD REC] at the point where you want to start recording.

1VHS

[3]Press [1, PLAY].

Start playing the video cassette and find the recording start point.

[4]Press [;, PAUSE], then press [¥, VHS REC].

Put the unit in recording standby mode.

[5] Start play on the other equipment.

[6] Press [;, PAUSE] at the point where you want to start recording.

∫To skip unwanted parts

Press [;, PAUSE] to pause recording. (Press again to restart recording.)

∫To stop recording

Press [∫, STOP].

For your reference

≥Almost all videos and DVD software on sale have been treated to prevent illegal copying. Such software cannot be recorded.

62