Panasonic DMR-E75V operating instructions Press DVD and press 1, Play, About DC channel

Advanced Operations DVD VHS

∫Manual Transfer (Dubbing)

You can specify the position to start transfer (dubbing) of the program recorded on the disc to the tape.

≥Copy-guarded discs cannot be dubbed. Most discs are copy- guarded to prevent illegal reproduction and they cannot be recorded with the following procedure.

Preparation

≥Select the unit viewing channel (or the AV input) on the TV.

DVD

≥Insert the disc containing the program to be copied (l 20).

≥Check the channel. If “TP” channel is selected, transfer (dubbing) does not work properly.

-When the “TP” channel is selected on DVD, you cannot select the “DC” channel.

VHS

≥Insert a video cassette with an intact erasure prevention tab.

(l 48)

≥Confirm that the remaining tape time is sufficient for recording. (l 57)

[1]Press [DVD] and press [1, PLAY].

Start playing the disc and find the recording start point. ≥Select the audio to be played (the audio to be recorded)

beforehand. [RAM]

≥When the DVD-R is inserted, you cannot select the audio.

[2]Press [;, PAUSE] at the start point of the recording.

[3]Press [VHS].

[4]Select “DC” channel with [CH, W, X].

≥The DVD picture is displayed on the TV.

[5]Press [1, PLAY].

Start playing the video cassette and find the recording start point.

[6]Press [;, PAUSE] at the start point of the

recording, then press [¥, VHS REC] to pause.

Put the unit in the recording standby mode.

[7]Press [REC MODE] to select the recording mode.

[8]Press [;, PAUSE].

≥VHS recording and disc play start at the same time.

To pause or stop Manual Transfer (Dubbing)

You cannot stop or pause on DVD and VHS at the same time

∫To pause or stop recording

Press [VHS] and press [;, PAUSE] or [∫, STOP].

∫To pause or stop play

Press [DVD] and press [;, PAUSE] or [∫, STOP].

∫When transfer (dubbing) is started, the following

operations also start automatically:

≥“Status Messages” on Display ) “Off” (l 45)

≥Audio output when playing back DVD ) Stereo (L R)

∫Only the following operations are allowed while

transfer (dubbing):

≥Turning the unit off/on

≥Stopping transfer (dubbing) by pressing [STOP]

Note:

≥When the transfer (dubbing) is already started, you can switch the output manually.

∫About DC channel

(DC: Dubbing input channel)

≥DC channel can be recorded only when the VHS input channel is set to “DC”.

≥When you play back a tape with the channel set to “DC”, the DVD picture is displayed on the TV screen.

61