Panasonic DMR-E75V operating instructions DVD Picture, DVD Sound, DVD Play

Helpful Hints		DVD	VHS
∫ DVD
DVD Picture				Page
Status messages do not	≥Select “Automatic” in “Status Messages” in the SETUP menu.			45
appear.
The blue background does not	≥Select “On” in “Blue Background” in the SETUP menu.			45
appear.
The 4:3 aspect ratio picture	≥Use the TV to change the aspect. If your TV does not have that function, set “Progressive” in			41
expands left and right.	the Video menu to “OFF”.
Screen size is wrong.	≥Check the settings for “TV Type”, “4:3 TV Settings for DVD-Video” or “4:3 TV Settings for			45
	DVD-RAM” in the SETUP menu.
There is a lot of after-image	≥Set “MPEG-DNR” in the Video menu to “OFF”.			41
when playing video.
When playing DVD-Video using	≥Set “Progressive” in the Video menu to “OFF”. This problem is caused by the editing method
progressive output, one part of	or material used on DVD-Video, but should be corrected if you use interlace output.			41
the picture momentarily
appears to be doubled up.
There is no apparent change in	≥The effect is less perceivable with some types of video.
picture quality when adjusted				41
with the Video menu in the on-
screen menus.
DVD Sound				Page
No sound.	≥Check the connections and settings. Check the input mode on the amplifier if you have			10–12,
Low volume.	connected one.			44
Distorted sound.	≥Press [AUDIO] to select the audio.			23, 27
Cannot hear the desired audio	≥Turn off V.S.S. in the following cases.			41
type.	- When using discs that do not have surround sound effects such as Karaoke discs.
	- When playing MTS broadcast programs.
Cannot switch audio.	≥You cannot change the audio type when a DVD-R is in the disc tray.			–
	≥You cannot change the audio type when playing a DVD-R. (You can select “Main” or “SAP” in			44
	“Select MTS” in the SETUP menu before recording.)
	≥You have used a digital connection. Set “Dolby Digital” to “PCM” or connect using audio			12, 44
	cables (analog connection).
	≥There are discs which audio cannot be changed because of how the disc was created.			–
DVD Play				Page
Play fails to start even when		≥Insert the disc correctly with the label facing up.		20
[1, PLAY] is pressed.		≥You tried to play a blank DVD-RAM/DVD-R, or discs unplayable on this unit.		19
Play starts but then stops		≥When recording to DVD-RAM using EP (8H) mode, play may not be possible on		43
immediately.		DVD players that are compatible with DVD-RAM. In this case use EP (6H) mode.
DVD-Video is not played.		≥Some DVD-Video cannot be played when you change the ratings level.		43
Alternative sound track and		≥The languages are not recorded on the disc.		–
subtitles cannot be selected.		≥You may have to use the disc’s own menus to select languages.		–
No subtitles.		≥When progressive output is on, closed captions cannot be displayed.		–
		≥Subtitles are not recorded on the disc.		–
		≥Turn the Subtitles ON.		40
Angle cannot be changed.		≥This function depends on software availability. Angles can only be changed during		–
		scenes where different angles are recorded.
You have forgotten your ratings		≥With the tray open, keep pressing [:/6] and [5/9] on the main unit		–
password.		simultaneously for 5 or more seconds.
Quick View does not work.		≥This does not work if the setting is “Off” in “Search Audio & PLAY t1.3”.		44
		≥This does not work when audio is other than Dolby Digital.		–
		≥This does not work when recording is in XP or FR mode.		–
The resume play function does not		≥This function only works when “PB” is flashing in the unit’s display.		21
work.		≥Memorized positions are canceled when the unit is turned off or when the tray is opened.		–
		The memorized position on the play list is also canceled when the play list and title are
		edited.

68