Panasonic DMR-E75V operating instructions Manual Transfer Dubbing, Press VHS and press 1, Play

Advanced Operations DVD VHS

∫Manual Transfer (Dubbing)

[RAM] [DVD-R]

You can specify the position to start transfer (dubbing) of the program recorded on the tape to the disc.

≥Available discs for transfer (dubbing) from tape are DVD-RAM and non-finalized DVD-R.

≥Copy-guarded video tapes cannot be dubbed. Most video tapes are copy-guarded to prevent illegal reproduction and they cannot be recorded with the following procedure.

Preparation

≥Select the unit viewing channel (or the AV input) on the TV.

DVD

≥Release protection (disc l 30, cartridge l 18). [RAM]

≥Insert a disc and confirm there is sufficient empty space for recording on it. (l 20, 47)

VHS

≥Insert the video cassette containing the program to be copied

(l 48).

≥Check the channel. If “DC” channel is selected, transfer (dubbing) does not work properly.

-When the “DC” channel is selected on VHS, you cannot select the “TP” channel.

[1]Press [VHS] and press [1, PLAY].

Start playing the video cassette and find the recording start point. ≥Select the audio to be played (the audio to be recorded)

beforehand.

[2]Press [;, PAUSE] at the start point of the recording.

[3]Press [DVD].

[4]Select “TP” channel with [CH, W, X].

≥The VHS picture is displayed on the TV.

[5]Press [REC MODE] to select the recording mode.

[6]Press [¥, DVD REC].

≥Disc recording and VHS play start at the same time.

To pause or stop Manual Transfer (Dubbing)

You cannot stop or pause on DVD and VHS at the same time

∫To pause or stop recording

Press [DVD] and press [;, PAUSE] or [∫, STOP].

∫To pause or stop play

Press [VHS] and press [;, PAUSE] or [∫, STOP].

∫When transfer (dubbing) is started, the following

operations also start automatically

≥“OSD” on VHS MENU ) “OFF” (l 56)

∫Only the following operations are allowed while

transferring (dubbing)

≥Turning the unit off/on

≥Stopping transfer (dubbing) by pressing [STOP]

Note:

≥When the transfer (dubbing) is already started, you can switch the output manually.

≥When a Copy-guarded tape is inserted, the message appears on the display and the recording stops on the spot.

≥If a part of the tape recorded in VP mode is dubbed to disc, noises may appear on the beginning of the dubbed part.

∫About TP channel

(TP: Dubbing input channel)

≥TP channel can be recorded only when the DVD input channel is set to “TP”.

≥When you play back a tape turning the channel to “TP”, the picture on VHS is displayed on the TV screen.

59