Panasonic DMR-E100H warranty Error messages, On the television, On the unit’s display

Page 63

Error messages

On the television

 

Page

Error has occurred. Please

≥A serious, but temporary error has occurred and one of the unit’s safety devices has activated.

—

press ENTER.

Press [ENTER]. The unit switches to the standby mode. Press [Í, DVD POWER] to turn the

 

 

unit on again.

 

 

 

 

No disc.

≥The disc is upside down.

14

No valid disc.

 

 

 

 

 

No PC card.

≥The card is not inserted. If this message is displayed with a compatible card already inserted,

22

No valid PC card.

turn off the power, remove and then re-insert the card.

 

No SD card.

≥The card inserted is not compatible or the card format does not match.

11

No valid SD card.

≥Format the card.

40, 42

 

 

 

This is non-recordable disc.

≥The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized DVD-R.

10

 

≥You cannot format a microdrive or mobile hard disk on this unit.

—

This disc is not formatted

 

 

properly.

 

 

 

 

 

Unable to format.

 

 

 

 

 

No disc can be read.

≥You inserted an incompatible disc.

10

This disc cannot be read.

≥An unformatted DVD-RAM is in the tray. Format the DVD-RAM.

44

 

 

 

No valid HDD card.

≥Insert a mobile hard disk that has been recorded using a Panasonic SD media storage device.

—

 

 

 

Please check write protect tab

≥Release protection from the DVD-RAM cartridge or the card.

—

on the disc cartridge.

LOCK

 

 

 

 

Cannot write.

PROTECT

 

 

 

 

Protected programs are

≥The program is write-protected. Cancel the protection.

36

existed.

 

 

 

 

 

Contents of this disc are pro-

≥The disc is write-protected. Cancel Disc Protection.

44

tected.

 

 

 

 

 

Cannot finish recording com-

≥The program was copy-guarded.

—

pletely.

 

 

 

 

 

Cannot record. Disc is full.

≥No space left on the HDD, disc or card.

36

 

‹ Create space by erasing any unwanted programs. [HDD] [RAM]

Cannot record. Maximum

‹ Use a new disc or card.

—

amount of programs exceeded.

 

 

 

 

 

Cannot record on the disc.

≥The disc is scratched. Use another disc.

—

 

≥The disc is dirty.

62

 

 

 

Please change the disc.

≥Press [<] to remove the disc. (Power goes off.)

—

 

 

 

This disc may not be played in

≥You tried to play a disc with a region number different from this unit’s region number. This unit

Cover

your region.

can only play discs with the region numbers compatible with this unit (1, All, or including the

page

 

number 1).

 

 

 

 

Your selection exceeds the

≥A ratings level has been set for DVD-Video with this unit. Unlock the unit with “Ratings” in

51

recorder’s rating limit.

“Disc”.

 

 

 

 

Finalizing is necessary for

≥To enable playback of your DVD-R on compatible equipment, it is necessary to finalize it.

44

compatible playback.

 

 

 

 

 

/

≥Operation is restricted on this unit or disc.

—

 

 

 

Cannot playback on this unit.

≥You tried to play a non-compatible image.

11

 

≥Turn the power off on the main unit and re-insert the card.

22

 

 

 

No folder

≥There is no compatible folder in this unit.

23

 

 

 

On the unit’s display

 

 

 

 

 

NO READ

≥The disc is dirty or badly scratched.

62

 

‹ Clean the disc if it is dirty.

 

‹ The disc cannot be played if it is scratched and this display doesn’t disappear.

—

 

≥The unit cannot read the disc.

—

 

≥You have used a DVD-RAM/PD lens cleaner and it has finished.

—

 

 

 

SELF CHECK

≥There was a power failure or the AC plug was disconnected while the power was on. The unit is

—

 

carrying out its recovery process. Wait until the message disappears.

 

 

 

 

UNSUPPORT

≥You have inserted a disc the unit cannot play or record on.

10

 

 

 

HARD ERR

≥If the message does not go away after turning the power off and on, consult your dealer for ser-

—

 

vice.

 

 

 

 

HDD SLEEP

≥In order to extend HDD life, the HDD is in SLEEP mode.

11

 

 

 

PROG FULL

≥There are already 32 timer recordings. Erase unnecessary timer recordings.

29

 

 

 

∑ CHK REMOTE

≥The remote control and main unit are using different codes. Change the code on the remote

54

(“∑” stands for a number.)

control.

 

 

 

 

U14

≥The unit is hot.

—

 

‹ The unit switches to standby automatically for safety reasons and you cannot operate it.

 

Wait for about 30 minutes for the service number to disappear.

—

 

‹ Select a position with good ventilation when installing the unit.

 

‹ Do not block the cooling fan on the rear of the unit.

—

 

 

 

U99

≥The unit fails to operate properly. Press [Í, DVD POWER] to switch the unit to standby. Now

—

 

press [Í, DVD POWER] again to turn the unit on.

 

 

 

 

Reference

63

RQT6986

Page 62 Page 64
Image 63
Page 62 Page 64
Contents Example Warranty can be found onRQLS0233 Inside of product FCC NoteBefore moving the unit, ensure the disc tray is empty Following Applies only in the U.S.AFeatures Accessories Table of contentsAntenna and television connections Video OUT terminalComponent Video OUT terminal Do not Remote controlBatteries UseIf Plug-in Auto Tuning fails Press 3, 4 to select Antenna Sys Tem and press EnterAdding and deleting channels Station Guide Channel Channel setting VCR Plusi guide channel settingsPress 3, 4 to select VCR Plusr CH Setting and press Enter CancelPress 3, 4 to select TV Type and press Enter Set up to match your televisionTelevision operation Press 3, 4 to select TV Screen and pressDiscs you can use Disc informationDiscs you can use for recording and play Play-only discs Discs that cannot be playedSD/PC card HDD Hard disk drive100 Remote controlPower button Í, DVD Power Control reference guideUnit’s display Main unitInserting discs Press REC Mode to select the recording mode nextRecording television programs Press OPEN/CLOSE to open the tray and insert a disc leftWatching the television while recording Press 3, 4, 2, 1 to select DV Auto REC and then Enter Recording from a video cassette recorderDV Automatic Recording DV Auto REC Press FunctionsPlaying while you are recording Simultaneous rec and playReviewing the recorded images while recording-Time Slip Press OPEN/CLOSE to open the tray and insert a disc Playing discsWhen a menu screen appears on the television Using the Direct NavigatorPosition Memory Other methods of play Marking places to play again-MARKER Skipping a minute forward-CM SkipSelecting an amount of time to skip -Time Slip Quick ViewPress 3, 4 to select the drive and press Enter Playing still pictures and SD Video MPEG4 programsPress 3, 4 to select Input and press Enter Press 3, 4 to select the folder and press EnterDVD- Jpeg RAM Press 3, 4 to select Slide Show and press EnterPress 3 To select Play Press Enter To play SD Video MPEG4 programsPress 3, 4, 2, 1 to select a group and press Enter Using menus to play MP3 discsPress TOP Menu Press 1 to display the tree screenWhile playing DVD-Audio or DVD-Video Changing audioPress Audio While playing HDD, DVD-RAM or Video CDTimer recording Using VCR Plusr codes to make timer recordingsSpecify a time to stop recording Manually programming timer recordings Check programs Auto Renewal RecordingPress 3, 4 to select the program and then Enter Press 3, 4 to select on and then EnterOr press Enter to change Change or cancel the programPress Cancel or ADD/DLT to delete Press 3, 4 to select the programSelect the dubbing direction Select the recording modeDubbing programs or play list Select items for dubbingCapacity for SD Video MPEG4 programs One Touch DubbingPress Dubbing Press 2, 1 to select Yes and press EnterPress 3, 4 to select Exit and press Enter Creating play listsPress Enter at the start point Press Enter at the end pointPlaying play lists Playing play list scenesTo erase a play list or a play list scene during playback Editing play lists Move Re-editErase Editing programs Enter at Press 2, 1 to Select ErasePress Enter Press 2, 1 to set protection and press EnterEditing still pictures To erase check marks Press 3, 4, 2, 1 to select a still picture and press EnterPress 3, 4, 2, 1 to select Copy and press Enter Select the copying driveFunctionsreturn Settings FormatProtect Print DpofPress 2, 1 to select Yes and press Enter Press 3, 4, 2, 1 to select Set Up or Cancel and press EnterPress Enter to complete Procedure Press 3, 4, 2, 1 to select Erase and press EnterEditing SD Video MPEG4 programs Press 2 Press 2, 1 to Press 2, 1 toSelect Yes Select Start Press Enter To completeSelect First play HDD, Disc settingDisc Protection Press 3, 4 to select Item and pressPress Press 2 Press 2, 1 to To complete Press Press Enter ProcedurePress 2, 1 to set disc Protection and pressTo erase a character Using the numbered buttons to enter charactersEntering text Press 3, 4, 2, 1 to select the character and press EnterDisplay examples On-screen displaysChanging the information displayed Press StatusPress 3, 4 to select the menu Using on-screen menusCommon procedures Disc menuOn next Play menuAudio menu Video menu3D NR When User is selectedChannel Changing the unit’s settingsSummary of settings Set UpAudio VideoDisplay ScreenDTS Tabs Menus Options Press Setup to show the menusPress Setup Audio channel for DV inputPress 3, 4 to select Time Zone Adjust and press Enter Clock settingsPress 3, 4 to select Manual Clock Setting and press Enter Press 3, 4 to select Auto Clock Setting and press EnterOther channel settings Press 3, 4 to select ChannelPress Enjoying more powerful sound Home TheaterEnjoying CATV/Satellite broadcasts Connecting a cable TV box/satellite receiver One cable TV box/satellite receiverTwo cable TV boxes Recording to digital recording equipment or cassette tapes Connecting an amplifier or system componentConnecting other video equipment Other antenna connections Other antenna connection to the unitOther antenna connection from the unit to the television Disc handling How to hold a disc or CardHandling precautions GlossaryError messages On the televisionOn the unit’s display Troubleshooting guide Sion Will be the front two speakers onlyDVD-R MaintenanceSpecifications User memo Limited Warranty only for U.S.APanasonic DVD Recorder Limited Warranty DMR-E100HProduct information Limited Warranty only for CanadaProduct Service Panasonic Canada IncPreparación Guía de referencia rápida en españolConexiones del televisor y de la antena Para disfrutar del vídeo progresivoReproducción de discos Pulse REC Mode para seleccionar el modo de grabaciónGrabación de progr amas de televisión Pulse ¥, REC para iniciar la grabaciónElectric Corporation of America Puerto Rico, Inc. PSC Index
Top Page Image Contents