Sylvania LC370SS8 M2 owner manual 5Manual Register, 5Antenna Confirmation

5Manual Register

The manual register function lets you add the channels that were not added by the auto channel scan due to the reception condition at the initial setting.

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “CHANNEL”, then press [ENTER].

5Antenna Confirmation

This function lets you check the signal strength of each channel.

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “CHANNEL”, then press [ENTER].

INTRODUCTION CONNECTION INITIAL SETTING

3 Use [Cursor K/L] to select “Manual Register”, then	3 Use [Cursor K/L] to select “Antenna”, then press
press [ENTER].	[ENTER].

Channell	Channell
Autoscan	Autoscan
Channel List	Channel List
Manual Register	Manual Register
Antenna	Antenna

	4 Use [the Number buttons] or [CH K/L] to select the
4 Use [the Number buttons] to enter the number of the
	channel for which you want to check the signal strength.
channel you want to add, then press [ENTER].

WATCHING TV OPTIONAL SETTING TROUBLESHOOTING

11

Manuall Registeri

For analog channels,	Register
select a channel to register using
number keys.
For digital channels,
you must perform Autoscan function.
BACK	Back
Ch Change

		11
Antenna
		Back
Now	0 Peak	0
CH	Ch Change

INFORMATION

5Press [SETUP] to exit.

Note:

•If set up completes successfully, “Registered to the Channel List” is displayed.

•If external input is used, it is not possible to register the channel and “Unavailable” will be displayed on the TV screen.

•If the channel is set to external input, you cannot confirm the antenna condition.

	Video1
Antenna
	Back
Indicator is available
for antenna signal only.
CH	Ch Change

5Press [SETUP] to exit.

23

EN