5Playback, 5Resume Playback, Enter or Play B

These operations are accessible by remote control. Some may also be accessible by controls on the main unit.

5Playback

5Disc Menu

INTRODUCTION

Before you begin:

Turn on the amplifier and any other equipment which is connected to this unit. Make sure the external audio receiver (not included) are set to the correct channel.

1Press [POWER] to turn on the unit.

2Insert a disc with label facing up.

•In case the DVD was recorded on both sides, make sure the label of the side you want to play back is facing up.

3The unit switches to the DVD mode when the unit was in TV mode and detects the type of disc.

e.g.) DVD

DVD

• Press [PLAY B] if the unit does not go to the DVD mode.

4The disc starts playback.

•If playback does not start automatically, press [PLAY B] again.

5Press [STOP C] to stop playback temporarily.

•If playback remains stopped for 5 minutes, the screen saver program will activate automatically.

6Press [EJECT A] to eject the disc.

Note:

•A “” may appear at the top-right on the TV screen when the operation is prohibited by the disc or this unit.

•Some DVD may start playback from title 2 or 3 due to specific programs.

•During the playback of a 2-layered disc, pictures may stop for a moment. This happens while the 1st layer is being switched to the 2nd layer. This is not a malfunction.

•When you cannot remove the disc, you may try either following operations.

-Press and hold [EJECT A ] on the unit for more than 5 seconds.

-Unplug the AC power cord and plug it in again, then press [EJECT A ].

It will take about 2 seconds to eject the disc, while that the unit will not respond to any key commands.

	DVD		CONNECTION
	Some discs contain disc menus which describe the contents of the disc or
	allow you to customize disc playback, or title menu which lists the titles
	available on the DVD.

	To call up the DVD menu, press [DISC MENU] and,
	use [Cursor K / L / s / B] to select an item, then press
	[ENTER] (or [PLAY B]).
			INITIAL
	To call up the title menu, press [TITLE] and,

	use [Cursor K / L / s / B] to select an item, then press		SETTING
	Note:
	[ENTER] (or [PLAY B]).

•Menu operations may vary depending on the disc.

Refer to the manual accompanying the disc for more details.

5Resume Playback

WATCHING

Press [STOP C] during playback.

e.g.) DVD

Resume message will appear on

the TV screen.

Resume ON

Press [PLAY B]. Playback will

Press 'PLAY' to play from here.

OPTIONAL

resume from the point at which

To play the beginning,

press 'STOP' first and then 'PLAY'.

playback was stopped.

Note:

SETTING

• To cancel resume information, press [STOP C] again in the

stop mode.

• The resume information will be kept even when unit is in

standby mode.

OPERATING

5Paused and Step-by-step Playback

Press [PAUSE F] during playback.

DVD

• Playback will be paused and sound will be muted.

To continue playback, press [PLAY B].

SETTING

DVD

Each time you press [PAUSE F] in the pause mode, the

DVD

disc goes forward one frame at a time.