Sylvania LD190552 owner manual Volume Adjustment, Silence Mode, Switching Audio Mode, 11−1

English

TV Screen Display Mode

5 types of display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal. And 3 types of display modes can be selected for PC input signal.

Press SCREEN MODE repeatedly to switch the TV aspect ratio.

For 16:9 video signal				Normal displays a 16:9 picture at its original size.
				4:3 displays a 16:9 picture at a 4:3 size; the picture is
				shortened horizontally. Sidebars appear on both edges
				of the screen.
				Movie expand displays a 16:9 picture that is
				vertically stretched to fill the screen.This only crops
Normal
		4:3	Movie expand out the top of the picture.
				Zoom displays a 16:9 picture at its maximum size
				without changing its horizontal and vertical ratio.
				Wide displays a horizontally stretched picture.This
				crops out the left and right sides of the picture.
	Wide		Zoom
For 4:3 video signal				Normal displays a 4:3 picture at its original size.
				Sidebars appear on both edges of the screen.
				16:9 displays a 4:3 picture at a 16:9 size; the picture is
				stretched horizontally to fill the screen.
				Movie expand displays a 4:3 picture at a 16:9 size;
				the picture is stretched more vertically at the top of
Normal		16:9	Movie expand the screen.This crops out the top of the picture.
				Zoom displays a 4:3 picture at a 16:9 size; at its
				maximum size that is more vertically stretched to fill
				the screen.This crops out the top and bottom of the
				picture.
	Wide		Zoom	Wide displays the picture with its center at the
				original size and the edges stretched horizontally to fill
				the screen.
For PC input signal				Normal displays a proportionately stretched picture.
				Sidebars appear on both edges of the screen.

		Full displays a picture that is stretched out of
		proportion horizontally to fill the screen.
		Dot By Dot displays a picture in its original size.
Normal	Full	Dot By Dot

Sound Functions

describe how to change the audio or the audio language as well as the volume.

Volume Adjustment

Use VOL.▲/▼ to adjust the volume.

15

INTRODUCTION PREPARATION WATCHING TV USING FUNCTIONS OPERATING DVD CONNECTING DEVICES

Silence Mode

Volume 30

will be displayed for a few seconds when adjusting the volume.

Press MUTE to turn off the sound temporarily.

	Mute	hi!		hola!
will be is displayed for a few seconds.			salut!
• Press MUTE again or VOL.▲/▼ to recover the original
	volume.
	Switching Audio Mode
	ATSC	NTSC

USEFUL TIPS

Press AUDIO repeatedly to cycle through the available audio languages.

•Available languages differ depending on the broadcast.

•[Other] is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French.

11−1

English 1/3

Press AUDIO to display the currently selected audio mode. While receiving an MTS broadcast, press repeatedly to cycle through the available audio channel.

11

SAP / STEREO

e.g.) When all audio are available

SAP / STEREO SAP / MONO SAP / STEREO

INFORMATION

STEREO : Outputs stereo-audio

SAP : Outputs second audio program

MONO : Outputs mono-audio