Sylvania LD190552 Vertical Position in PC Settings are set correctly, Entire screen, Surface

English 37

INTRODUCTION

	Symptom	Remedy
	The display image does not cover	• If you are using the unit as a PC monitor, make sure that [Horizontal Position] and
			[Vertical Position] in [PC Settings] are set correctly.
	the entire screen.	• If you are watching TV or using the Composite Video, Component Video or HDMI with 480i Input,
			press SCREEN MODE	repeatedly to switch various screen modes.
	Captions are displayed as a white	• Interference from buildings or weather conditions may cause captioning to be incomplete.
T box. No caption is displayed in
		• Broadcasting station may shorten the program to insert advertisement.
	the Closed Caption-supported
			The closed caption decoder cannot read the information of the shortened program.
V	program.
	No caption is displayed when	•	The disc or cassette tape may be illegally copied, or the caption signal might not have been read
	playing back a disc or a cassette
			during copying.
	tape containing captions.
	Black box is displayed on the TV	•	The text mode is selected for caption. Select [CC-1], [CC-2], [CC-3], [CC-4] or [Off].
	screen.
	Completely distorted picture or	• Make sure the disc is compatible with the unit.
	black/white picture with DVD.
	Picture freezes momentarily during	• Check the disc for finger prints/scratches and clean with a soft cloth wiping from center to edge.
	playback.
		•	Clean the disc.
		• Ensure the disc is correctly inserted.
	Disc cannot be played.	• Check if the disc is defective by trying another disc.
		• Cancel the parental lock or change the control level.
D		• Insert a correct disc that plays on this unit.
		• Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its
V			surface.
	Buttons do not work or the unit	•	To completely reset the unit, unplug the AC power cord from the power outlet for 5-10 seconds.
D	stops responding.
	The unit does not respond to	•	Operations may not be permitted by the disc. Refer to the instructions of the disc.
	some operating commands during
	playback.
	Angle does not switch.	•	The angle cannot be switched for DVD which do not contain multiple angles. In some cases
			multiple angles are only recorded for specific scenes.
	Playback does not start when the	• Check the [PARENTAL] setting.
	title is selected.
	The password for rating level has	•	Enter the default password (4737), then your forgotten password will be cleared.
	been forgotten.

Note

•The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a fixed point of blue, green or red.

This is not to be considered a defect in the LCD screen.

•Some functions are not available in specific modes, but this is not a malfunction. Read the description in this manual for more details on correct operations.

•Some functions are prohibited on some discs.

PREPARATION WATCHING TV USING FUNCTIONS OPERATING DVD CONNECTING DEVICES USEFUL TIPS INFORMATION