Sylvania LD190552 Repeat Playback, Repeat A-B Playback, Random Playback, Programmed Playback

Repeat Playback

Repeat function is available only during playback.

1 During playback, press MODE repeatedly until [] appears.

2 Press ▲/▼ to change the repeat mode.

DVD

OFF	repeat off
CHAPTER	current chapter repeat
TITLE	current title repeat
CD
OFF	repeat off
TRACK	current track repeat
ALL	entire disc repeat

3 Press BACK to exit.

Repeat A-B Playback

You can repeat playback between A and B on a disc.

1 During playback, press MODE repeatedly until [ AB ] appears.

2 Press ENTER at your desired starting point (A). 3 Press ENTER at your desired ending point (B).

•Point B should be in the same title or track as point A.

•Within a few seconds, the section A-B will begin to play back repeatedly.

4 To cancel repeat A-B playback, press MODE repeatedly until [ A B ] appears.

Press ENTER so [OFF] appears.

Note

•Repeat setting (except [ALL]) will be cleared when moving to another title or chapter, track.

•During programmed playback, repeat setting will be effective for the tracks in the program.

•Repeat playback or repeat A-B playback may not available with some discs.

•Repeat A-B playback does not function during other repeat mode.

•To cancel point A, press CLEAR at step 2 in [Repeat A-B Playback].

•Stopping playback will cancel repeat A-B playback.

Random Playback

CD

This function shuffles the playing order of tracks instead of playback in the sequence.

1 In stop mode, press MODE repeatedly until [RANDOM] menu appears.

	English	31
2 Press PLAY B to start random playback.		INTRODUCTION
Note
• To repeat the current track in the random mode, follow the steps
1 and 2 in [Repeat Playback] and select [ TRACK]. ➠ p.31
• To repeat the entire random selections, follow the steps 1 and 2 in
[Repeat Playback] and select [ ALL]. ➠ p.31
		PREPARATION
Programmed Playback
CD

You may determine the order in which tracks will play back.
		WATCHINGTV
2	Use ▲/▼ to select a desired track, then press ENTER to
1	In stop mode, press MODE repeatedly until [PROGRAM]
	menu appears.
	store.
	• Additional tracks may be on other screens. Use ▲/▼
		USING
	to go on to the next / previous pages.
	• Repeat this step until you have selected all the tracks	FUNCTIONS
	SKIP H/ G to see all the tracks.
	you wish to play back in the program.
	• Up to 99 tracks can be ordered.
	• If 8 or more tracks were in a program, use
3 Press PLAY B to start programmed playback.
		OPERATING
	an error.
Note
•	Press CLEAR to erase the last track in the program if you make
•	To erase all programmed tracks at once, select [ALL CLEAR] and	DVD
	press ENTER at step 2.
•	While a program is being played back, STOP C works as follows:
	- Pressing STOP C once:The track will be in the resume standby
	in the original order. However, your programmed playback can	CONNECTING
	mode. Next time you press PLAY B, the playback will resume
	from the point where it is stopped in the programmed playback.
	- Pressing STOP C twice: Resume mode will be canceled. Next
	time you press PLAY B, playback will restart from the first track
	be restarted when you follow the above steps. (Your programs	DEVICES
	standby mode.)
	are still stored until either the disc is ejected or the unit goes into
	- On some discs, STOP C will not work while the resume message
	appears. Please wait until the message disappears.
• To repeat the current track in the program, follow the steps 1 and		USEFUL
•	To repeat the entire program, follow the steps 1 and 2 in [Repeat
	2 in [Repeat Playback] and select [TRACK]. ➠ p.31
	Playback] and select [ALL]. ➠ p.31	TIPS
•	Ejecting the disc or the unit goes into standby mode will erase the
	program.
•	You cannot use the Number buttons to select another track
	during programmed playback. Use SKIP H/ G to select other
		INFORMATION
	tracks in the program.
•	You cannot combine random playback with programmed playback.
•	You cannot alter a programmed order during playback.
•	You can start programmed playback only while in [PROGRAM]
	menu.