Sylvania DigitalVideoDiscRecorder owner manual To stop the timer recording in process, Press Power

TIMER RECORDING

Checking, canceling, or correcting the timer programming information

1) Press [POWER].

will disappear on the front panel display.

2)Press [TIMER PROG.].

3)Check the information on the list you want to edit.

Timer Programming

JAN/ 2/07 12:00 AM L1 SP
2H (1:00)		MON JAN/01 10:00AM
Date	Start	End	L1/L2
JAN/02	12:00AM	1:00AM	L1
	New Program
			1/1

4-A) To delete the timer program:

1 Use [K / L] to select the program you want to delete, then press [ENTER].

2 Use [K / L] to select “Delete”, then press [ENTER].

Selection menu will appear.

3 Use [K / L] to select “Yes”, then press [ENTER].

4-B) To correct the timer program:

1 Use [K / L] to select the program you want to correct, then press [ENTER].

2 Use [K / L] to select “Program Change”, then press [ENTER].

3 Correct the timer program by using [K / L / { / B], then press [ENTER].

5)Press [TIMER PROG.] to exit.

6)Press [POWER] to return to the timer standby mode.

To stop the timer recording in process

Press [STOP C] on the front panel of the unit. [STOP C] on the remote control is not effective.

Note

•Press [TIMER PROG.] to check the timer recording in progress.

When the timer recording is proceeding, that program will be highlighted with red. In this case, you cannot select any other program.

If the timer program did not complete correctly, the error number appears in the timer pro- gramming list.

				Timer Programming
							TUE JAN/02 10:00AM
					Date	Start	End	L1/L2
			E41		JAN/02	12:00AM	1:00AM	L1
						New Program
								1/1
Each error number means:
	E1-22	Recording error other					E35	PCA full *1
	E37-39	than below
	E23-24	Unrecordable disc					E36	Already finalized
								video format disc
	E25-28	Copy prohibited program					E40	Some portion has
								not been recorded
								because of program
	E29	Disc protected						overlapping.
								Recording did not
	E30	Disc full
								start at the start time.
	E31-32	Already 99 titles					E41	Power failed
		recorded
	E33	Already 999 chapters					E42	No disc when recording
		recorded
	E34	No space for Control
		information

•A program with the error number is grayed in the timer programming list.

•Once the timer programming list with error line(s) is displayed, or after canceling and setting again the timer standby mode, the program line(s) with error will be cleared.

*1 PCA is a disc's space reserved for recording test.

Disc Introduction Connections Basic Setup Management Recording Playback Editing Function Setup Others

Español

EN 35