Sylvania DigitalVideoDiscRecorder Others, You press OPEN/CLOSE a, Repairing process MAY not work

Page 82

TROUBLESHOOTING

Symptom

Remedy

Others

The unit does not operate

• When static electricity, etc., causes the unit to operate abnormally, unplug

properly.

the unit and then plug it in again.

The disc tray does not open when

• It may take a few seconds for the disc tray to open after you have recorded or

you press [OPEN/CLOSE A].

edited a disc. This is because the unit is adding disc data to the disc.

“Repairing” appears on the TV

• If there is a power failure or unplugging during recording, finalizing,

screen.

formatting or editing (even after “Repairing” disappears), a repairing process

will begin automatically just after turning the unit on again.

It may take several minutes up to about several hours.

Repairing

• If you intend to cancel the repairing process, press [OPEN/CLOSE A]

In a case you intend to cancel the

repairing process.

on the front panel, then select “Yes” and press [ENTER]. After that, press

[OPEN/CLOSE A] to take out the disc. The disc canceled during the

Do you want to cancel a repairing process ?

repairing process MAY NOT work.

When selecting “Yes”, the disc may not be

usable.

Yes

No

Repairing

82 EN

Image 82

Contents ZC320SL8B Make your contribution to the environment PrecautionsLaser Safety RADIO-TV InterferenceImportant Safeguards PrecautionsMoisture Condensation Warning Installation Location Supplied AccessoriesAvoid the Hazards of Electrical Shock and Fire About CopyrightCleaning discs Maintenance ServicingCleaning the cabinet Cleaning the disc lens Disc handlingContents Features Features DVD-RRegion Codes Unplayable DiscsColor Systems DVD-VIDEO CD-DA CD-RWFunctional Overview Front PanelFunctional Overview Rear PanelUsing a Remote Control Remote ControlInstalling the Batteries in the Remote Control Open the cover Insert batteriesSetup button Timer PROG. buttonPower button Zoom buttonWith the clock display Front Panel DisplayDisplay Message Current status of the unitMake the connection as illustrated below Plug in the power cords of the devices to the AC outletFollowing the steps in Settings for the Video in R Supplied cables used in this connection are as followsPress Setup to exit Settings for the Video InputIf you want to use S-VIDEO in jack, select S-Video This unit Connection to a TVConnections Basic Audio OUT Video OUTAudio Connection to AN Audio SystemAudio OUT Disc Information/Menu Title Name Information On-Screen Display / MenuOFF File Name InformationGuide to ON-SCREEN Displays and Menus Main MenuProceed to in Clock Setting on Initial SettingPress Enter to activate Clock Clock Setting Setting the ClockUse K / L to select calendar or time, then press Enter Formatting a Disc Choosing the Recording Format of a Brand-New DVD-RWReformatting a Disc Manually If you want to cancel formatting, select NoFormatting a Disc Formatting is completed.100% is indicatedPress Setup to exit Setting for Auto ChapterSetting Aspect Ratio for Video Mode Recording Preparing a DiscOFF ON, then press ENTER. e.g. VR mode DVD-RW Setting a Disc to ProtectTo cancel the disc protect Use K / L to select Yes, then press EnterAuto Finalizing General Setting menu will appearYour setting will be activated Use K / L to select Recording, then press EnterFinalizing a Disc Press Setup Use K / L to select DVD Menu, then press EnterPlaying the Discs in Other DVD Players Finalizing is completedTo cancel finalizing DVD-RW only Restrictions on Recording Information on DVD RecordingRecording Speed VideoPress REC Speed to select a recording speed Press PowerPress OPEN/CLOSE a to close the disc tray It may take awhile to load Disc completelyPress REC/OTR to start recording Press Stop C to stop recordingWill be displayed for 5 seconds Press B Timer RecordingUse K / L to enter the date, then To exit, press Timer PROG. or Setup Timer RecordingPress Power to set a timer programming Use K / L to select a recordingPress Power To stop the timer recording in processPress Timer PROG. to exit Hints for Timer Recording Priority of Overlapped SettingsSpeed Satellite LinkUse K / L to set the desired starting time, then press B Use K / L to select the recordingSatellite Link To Standby Mode is highlightedPress Power to turn on the unit Press EnterConnection to an External Device External deviceSettings for AN External Device Recording from an External DeviceStructure of Disc Contents Information on PlaybackDirect Playback Refer to Using the Title/Disc Menu onBasic Playback Press Stop C once to stop playback temporarilyUse K / L to select Play From Basic PlaybackPlayback from the Title List Start, then press EnterJpeg pictures can also rotate by using K / L / / B Disc trayPause Using the Title / Disc MenuKodak Picture CD Fast Forward / Fast Reverse Playback Special PlaybackResume Playback Skipping TV Commercials During PlaybackStep by Step Playback Special PlaybackRapid Playback Slow Forward / Slow Reverse PlaybackDVD-video Marker SettingZoom Title track number and the time will be displayedSearch Using Skip j / SkipUsing Display Title/Chapter SearchTime Search SearchAudio CD Repeat Playback Random PlaybackProgram Playback 5Press Play BSwitching Subtitles Switching Audio SoundtrackSelecting the Format of Audio and Video Switching Virtual Surround SystemSwitching Camera Angles Reducing Block NoiseInformation on Disc Editing Guide to a Title ListDeleting Titles After the disc is fully recordedDeleting Titles CREATING/DELETING Playlist Adding Titles to a PlaylistUse K / L to select Yes, then press ENTER.DVD Menu CREATING/DELETING PlaylistErasing All Playlist Main menu will appearUse K / L to select Edit Title Name, then press Enter Editing DiscsPutting Names on Titles Use K / L to select Edit, then pressPutting Names on Titles cont’d Editing DiscsGuide to Edit Title Name Press Return Setting or Clearing Chapter MarksUse Skip H / G Submenu will appearDeleting a Part of a Title Use K / L to select Delete then press Enter Deleting a Part of a Title cont’dPart of the title is deleted Press Return or Stop C to exit For VR mode DVD-RW, press MENU/LIST to select PlaylistDividing a Title You can divide one title into 2 new titlesCombining, then press Enter Combining TitlesUse K / L/ / B to select another Title to combine, then press EnterConfirm the indication OFF ON. Press Enter again Setting or Releasing the Title ProtectionTo protect a whole disc VR mode DVD-RW only Press Return and then Return or Stop C to exitUse K / L to select the desired interval, then press Enter Setting or Clearing All Chapter Marks at OnceUse K / L to select Chapter Mark If you select OFF at , all the chapter marks are erasedList of Settings ContentsList of Settings 70 ENUse K / L to select a desired item SetupsPlayback Refer 1 to 7 on pages 72 to 74Use the Number buttons to enter the current password SetupsParental Lock Default All Playback cont’dAudio Out Disc Menu Language Default EnglishAudio Language Default Original PCMAngle Icon Default on Subtitle Language Default OFFStill Mode Default Auto Display Selection menu will appearFL Dimmer Default Bright OSD Language Default EnglishScreen Saver Default 10 minutes Display cont’dRefer 1 to 2 on page 78 and set the selected item When you finish with the setting, press Setup to exitVideo For 3 , refer to Connection to an External Device onTV Aspect Default 43 Letter Box Progressive Default OFFVideo cont’d Select Yes again using K / L , then press Enter Reset AllSelect Yes using K / L , then press Enter Function SetupTroubleshooting Symptom RemedyRecording / Timer recording / Editing TroubleshootingStop C Others OPEN/CLOSE a to take out the disc. The disc canceled duringRepairing process MAY not work You press OPEN/CLOSE aError message Cause Solution Frequently Asked Questions Language Code Language CodeGlossary Recording SpecificationsGeneral TerminalsCódigos de Región EspañolDiscos no Reproducibles Disco simple de video VSDUtilice K / L para seleccionar la Presione Setup y utilice K / LEspañol Posición de la entrada externaPresione REC/OTR para iniciar la grabación Presione PowerPresione Enter para activar Ajste Manual de Reloj Para de tener la grabación presione Stop CAbra la bandeja Presione Timer ProgConfigure una programación del temporizador Presione Enter Detenga laE7E2BUD Customer ServiceTel 1VMN23640