Dell W2600 owner manual Setting Up Your TV, Proper Location for Your TV, Connecting Your TV

Page 14

Setting Up Your TV

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions

located in the Product Information Guide.

Proper Location for Your TV

Consider the following environmental factors when you are deciding where to put your TV:

Do not store or use the TV in locations that are exposed to high heat, direct sunlight, or extreme cold.

Avoid moving the TV between locations with extreme temperature differences. For more information, see Specifications.

Do not subject the TV to severe vibration or high impact conditions. Do not place the TV inside a car trunk.

Do not store or use the TV in locations where the TV would be exposed to high humidity or dusty environment.

Do not place the TV in a location where water or other liquids could spill on or into the TV.

Connecting Your TV

Your TV has five types of standard connectors.

Quality

Cable and Connector

When to Use

 

 

 

Good

 

Coaxial (RF) carries the video and audio

 

 

through a single cable. The coaxial connector

 

 

is labeled ANT/Cable on your TV. To locate

 

 

the connector, see "Bottom View" on page 8.

Setting Up Your TV

13

Image 14
Contents Dell W2600 26 LCD TV Dell W2600 26 LCD TV August Contents Using the Self-Test Feature When Your TV is Connected Problems When Using the TV as a MonitorFront View Is in power save modeAbout Your TV About Your TVChannel button Push to display the Input Select menu Right Side ViewPush to turn the TV on and off Video right audio connector Composite connector AV1S-Video connector AV3 Video connector AV3Bottom View Package Contents W . d e l l . c o m s u p p o r t . d e l l . c o m Caring for Your TV PC Audio cable DocumentationAbout Your TV Proper Location for Your TV Setting Up Your TVConnecting Your TV Connector, see Left Side View on Quality Cable and Connector When to Use GoodVideo connector, you also need to connect Better Video splits the video signal into twoUsing the ANT/Cable Coaxial Connector Using the S-Video Connector Using Component Connectors Using the Scart Connector Using the DVI Connector Using VGA Setting Up Your TV Setting Up Your TV Your Remote Control Your Remote ControlInstalling Batteries Using Your Remote Control CH up icon Push to view the next channel Image when in card reader modeEnters and exits PIP mode Menus in the on-screen display OSDEnters and exits POP or PBP mode POP PBPUsing Your TV With a Universal or Learning Remote Control Your Remote Control Using the On-Screen Display Using the On-Screen DisplayUsing Your Remote Control With the OSD Selecting Your OSD Language Input Select MenuMovies Sports Weak Signal Multimedia Picture MenuAudio PBPSleep Timer TeletextOSD Setup Card ReaderUsing the On-Screen Display W . d e l l . c o m s u p p o r t . d e l l . c o m Troubleshooting Your TV Troubleshooting Your TVTroubleshooting Tips General Problems ProblemProblem On page 5 for the location of the connectors Problem Possible SolutionCable colors match the connectors colors Reconnect the device using the same typeUpdate the size settings in the OSD. Press Menu Update the color settings in the OSD. Press MenuOn the remote control and select Picture On the remote control and select SizeOSD Messages Message Possible Solution Auto AdjustAdjustment Remote Control Problems Problems With the Card ReaderProblems When Using the TV as a Monitor Documentation for the location of connectors Problem Possible Solution No audioUsing VGA on page 20. See your computer Troubleshooting your computerTroubleshooting Your TV Specifications for Your TV Inputs Picture-In-PictureViewing Angle Composite CvbsAudio OutputsHeadphone Specifications for Your TV Index IndexScart
Related manuals
Manual 2 pages 3.41 Kb