Dell W2600 owner manual Remote Control Problems, Problems With the Card Reader

Page 44

Message

Possible Solution

 

 

No Card Detected in Card Reader

Remove and reinstall the card.

 

Ensure you are using a card that is supported by the

 

card reader. Your card reader supports the following

 

card types:

 

• Compact Flash

 

• Secure Digital

 

• Memory stick

 

• Smart Media

 

• Multimedia card

 

 

Remote Control Problems

Problem

Possible Solution

The TV does not respond when using the remote control

1 Point the remote control directly at the lower right corner of the TV. Be sure that nothing is blocking the front of the TV. For the location of the IR, see "Front View" on page 5.

2 Verify that the batteries are properly installed.

3 If the batteries are old, install new batteries.

NOTE: Bright lights or other infrared devices may interfere with your remote control and IR on the TV.

Problems With the Card Reader

Your card reader supports jpeg file formats and the following card types:

Compact Flash

Secure Digital

Memory Stick

Smart Media

Multimedia Card (MMC)

Follow the installation instructions that came with your card reader. When you install the card reader, locate the arrow on the front of the card reader and ensure that the arrow is pointing up when you slide the card reader in to place.

When the card reader is installed, press Menu on the remote control, select Input Select, and then select Card Reader.

Troubleshooting Your TV

43

Image 44
Contents Dell W2600 26 LCD TV Dell W2600 26 LCD TV August Contents Using the Self-Test Feature When Your TV is Connected Problems When Using the TV as a MonitorIs in power save mode About Your TVFront View About Your TVChannel button Push to display the Input Select menu Right Side ViewPush to turn the TV on and off Composite connector AV1 S-Video connector AV3Video right audio connector Video connector AV3Bottom View Package Contents W . d e l l . c o m s u p p o r t . d e l l . c o m Caring for Your TV PC Audio cable DocumentationAbout Your TV Proper Location for Your TV Setting Up Your TVConnecting Your TV Quality Cable and Connector When to Use Good Video connector, you also need to connectConnector, see Left Side View on Better Video splits the video signal into twoUsing the ANT/Cable Coaxial Connector Using the S-Video Connector Using Component Connectors Using the Scart Connector Using the DVI Connector Using VGA Setting Up Your TV Setting Up Your TV Your Remote Control Your Remote ControlInstalling Batteries Using Your Remote Control Image when in card reader mode Enters and exits PIP modeCH up icon Push to view the next channel Menus in the on-screen display OSDEnters and exits POP or PBP mode POP PBPUsing Your TV With a Universal or Learning Remote Control Your Remote Control Using the On-Screen Display Using the On-Screen DisplayUsing Your Remote Control With the OSD Selecting Your OSD Language Input Select MenuMovies Sports Weak Signal Multimedia Picture MenuAudio PBPSleep Timer TeletextOSD Setup Card ReaderUsing the On-Screen Display W . d e l l . c o m s u p p o r t . d e l l . c o m Troubleshooting Your TV Troubleshooting Your TVTroubleshooting Tips General Problems ProblemProblem Problem Possible Solution Cable colors match the connectors colorsOn page 5 for the location of the connectors Reconnect the device using the same typeUpdate the color settings in the OSD. Press Menu On the remote control and select PictureUpdate the size settings in the OSD. Press Menu On the remote control and select SizeOSD Messages Message Possible Solution Auto AdjustAdjustment Remote Control Problems Problems With the Card ReaderProblems When Using the TV as a Monitor Problem Possible Solution No audio Using VGA on page 20. See your computerDocumentation for the location of connectors Troubleshooting your computerTroubleshooting Your TV Specifications for Your TV Picture-In-Picture Viewing AngleInputs Composite CvbsAudio OutputsHeadphone Specifications for Your TV Index IndexScart
Related manuals
Manual 2 pages 3.41 Kb