Dell W2600 owner manual Update the color settings in the OSD. Press Menu, Select Factory Reset

Problem	Possible Solution
Picture is too dim or too bright	Update the color settings in the OSD. Press Menu
	on the remote control and select Picture.
The screen is not centered correctly	1	Update the size settings in the OSD. Press Menu
		on the remote control and select Size.
	2	Reset the original factory defaults. Press Menu
		on the remote control, select Setup, and then
		select Factory Reset.
Screen has one or more lines	1	Check the aspect ratio settings in the OSD. Press the
		Menu button on the remote control and select Size.
		For more information on using the OSD, see "Using
		the On-Screen Display" on page 29.
	2	Ensure the proper source is selected in the Input
		Select menu. See "Input Select Menu" on page 30
		for more information.
	3	Try connecting a different device. Ensure that you
		properly connect the cables and update the input
		source in the OSD.
	4	Update the size settings in the OSD. Press Menu on
		the remote control and select Size.
	5	Reset the original factory defaults. Press Menu on the
		remote control, select Setup, and then select Factory
		Reset.
The side panel buttons do not work	Check the OSD to see if the buttons have been locked.
	Press Menu on your remote control, select Setup.
	If you are unable to use the remote control, press the
	volume up and the channel up buttons on the side
	of the TV for 10 seconds to unlock the buttons.
The picture is too small	1	Adjust the size settings. Press Menu on the remote
		control, and select Size.
	2	This may be a problem with your device. See the
		documentation for the device.

Troubleshooting Your TV

41