Options OPT. Menu, Display Startup Screen/Error Message

4-8-5. Display Startup Screen/Error Message

If no input is detected when switching to an RGB or video source, either the startup screen and error message ªNO INPUT DETECTEDº or a blank screen with no error message will display. Press the left/right menu

arrow (← MENU → ) or move the stick switch left/right to select the IMAGE menu and the MESSAGE

sub-menu.

SETUP INPUT

MIRROR →

BLANK →

REVEAL →

MENU SIZE →

MESSAGE →

IMAGE OPT.

MESSAGE ON

MESSAGE OFF

Select this option:

MESSAGE ON

MESSAGE OFF

To display:

Startup screen and error message display if no input is detected

Blank screen, no message, no startup screen if no input detected

4-9. Options (OPT.) Menu

4-9-1. Communication Speed

The data speed of transmission (bPS) can be set for the computer mouse control. Press the left/right menu

arrow (← MENU → ) or move the stick switch left/right to select the SETUP menu and the COM. SPEED sub-menu. The computer mouse for most IBM compatible computers will operate at a baud rate of 1200.

SETUP INPUT IMAGE

OPT.

		→
	COM. SPEED	→
	COM. BITS	→
	MOUSE	→
	TIMER	→
	LANGUAGE	→
	AUTO OFF	→

COM. SPEED (bPS)

1200 (MOUSE)

2400

4800 9600

19200

Select this option:

Communication Speed (bPS)

To adjust the following:

Data speed of transmission: 1200 (mouse), 2400, 4800, 9600, 19200

4-9-2. Communication Bits

The data format of transmission is set with this option. Press the left/right menu arrow (← MENU → ) or move

the stick switch left/right to select the OPT. menu and the COM. BITS sub-menu. The computer mouse for most IBM compatible computers will operate at a speed of 7N1.

SETUP INPUT IMAGE

OPT.

	COM. SPEED	→
		→
	COM. BITS	→
	MOUSE	→
	TIMER	→
	LANGUAGE	→
	AUTO OFF	→

COM. BITS

7N1 (MOUSE)

8N1

Select this option:

Com. Bits: Speed of mouse movement

To adjust the following:

7N1 (mouse) . . 7 data-bits, no parity, 1 stop bit 8N1 . . . . . . . . . 8 data-bits, no parity, 1 stop bit

16		Multimedia Projector MP8030	 3M 1996
	3M