Aiwa TV-C1300U manual Watching a video or other equipment, Troubleshooting, Specifications

Page 17

Watching a video or other equipment

TV/VIDEO

GAME

Number buttons

ADDITIONAL INFORMATION

Troubleshooting

If the unit does not seem to operate properly, read the instructions again, then check the following guide.

There is no picture or sound

The unit is in VIDEO input mode.

There is no sound.

Increase the volume level.

There is poor or no color

Adjust the color setting.

The remote control does not operate

Replace both batteries with new ones.

Clicking noise sounds.

Unavoidable expansion or contraction of cabinet due to temperature changes. This is not a problem.

VIDEO

AUDIO

VOLUME

CHANNEL

POWER

PHONES

 

TV/VIDEO

 

 

VIDEO INPUT

TV / VIDEO / ENTER

1 Press TV/VIDEO on the remote control or TV/ VIDEO/ENTER on the TV to display "VIDEO 1" or "VIDEO 2" for a few seconds.

VIDEO 1: input from the VIDEO 1 INPUT AUDIO/VIDEO jacks on the rear

VIDEO 2: input from the VIDEO 2 IN AUDIO/VIDEO jacks on the front

2 Set the VCR or other equipment to playback.

To return to the TV program

Press TV/VIDEO on the remote control or TV/VIDEO/ ENTER on the TV repeatedly until the TV program appears. Also, you can return to the TV program by selecting the channel number directly with the number buttons.

To switch the GAME position directly

Press GAME to select the AV mode to GAME. The TV input mode changes to VIDEO 2 automatically. And the screen becomes to the adequate size for games.

When connecting to the AIWA VCR with the ONE-TOUCH PLAYBACK

When ONE-TOUCH PLAYBACK or OTPB on the remote control of VCR is pressed, this unit automatically turns on and is in the VIDEO 1 mode. However, this function does not operate in the following cases:

ONE-TOUCH PLAYBACK on the VCR is pressed.

The TV and VCR is not placed in the place where they can receive the signal from the remote control simultaneously.

Note

For details on how to use the VCR, consult the individual owner's manual for the VCR.

Specifications

Tuner System

Frequency synthesized tuner

TV System

NTSC-M

 

Channel Coverage

VHF: 2 to 13

 

UHF: 14 to 69

 

CATV: 5A, A-1 to A-5, A to W,

 

W+1 to W+84

Program Memory

181

 

Antenna Input

75 ohms, unbalanced

Picture Tube

13"

 

Screen Size

280 (W)

211 (H) mm (111/8 83/8 in.)

 

335 mm (diagonal) (131/4 in.)

Video Input

1 Vp-p 75 ohms

Audio Input

0.5 Vrms., 33 k ohms more

Speaker

76 mm (3 in.) round

Operating Voltage

120 V AC, 60 Hz

Power consumption

65 W

 

Earphone Jack

Monaural-mini jack

Operating temperature 5˚C – 40˚C

Operating Humidity

35% – 80%

Dimensions

378 (W)

320 (H) 363.5 (D) mm

 

(15

125/8 143/8 in.)

Weight

9.5 kg (20.9 lbs.)

Accessories

Remote control (1)

 

Batteries (R6/size AA) (2)

Telescopic antenna with the antenna adaptor (1)

Design and specifications are subject to change without notice for the purpose of performance improvement.

ENGLISH 16

Image 17
Contents TV-C1300U Electric Power InstallationDamage Requiring Service MaintenanceOutdoor Antenna LightningWelcome Table of contents Basic connections Connecting the antennaTo Connect the supplied telescopic antenna Connect the AC cord to the AC wall outletCatv connections To connect a Catv system without using a Catv converterTo Connect a Catv system using a Catv converter To connect a video camera or a game machine Connecting a VCR or other equipmentSetting the language Preparing the remote controlUsing the remote control Inserting the batteriesPress Volume +/- to erase or add a selected channel Setting the channelsAdding or erasing the channels manually Press MenuWatching a TV program Setting the sleep timerPress Caption repeatedly to select the caption mode Selecting the closed captions modeCaptions Full Screen TextAdjusting the picture Selecting the AV modePress AV Mode repeatedly to select the AV mode Press AV Mode repeatedly to select the AV mode to adjustRegistering the password Setting the V-chipPress Volume +/- to adjust the setting Enter the password 4 digits using the number buttonsTo use the TV after the TV is protected Setting the V-chipRegistering a broadcasting station name Changing the passwordRepeat steps 5 and 6 to enter a broadcasting station name On-screen displayTo change the on-screen function display Watching a video or other equipment TroubleshootingSpecifications Parts and controls Remote controlFront panel Rear panel8Z-JBJ-910-21 000612CTN-YX Alimentation AvertissementAntenne externe Remarque pour l’installateur du systè me CatvEn cas de panne FoudreOptimiseur vidé o PuceSous-titres RemarqueRaccordement de base Raccordement de l’antennePour raccorder l’antenne té lescopique fournie Raccordez le cordon d’alimentation sur une prise muralePour raccorder un systè me Catv avec un convertisseur Catv Raccordement CatvRaccordement d’un magnétoscope ou d’un autre appareil Utilisation de la télécommande Préparation de la télécommandeSélection de la langue d’affichage Introduction des pilesAjout ou suppression manuel de chaînes Sélection des chaînesReglage et appuyez ensuite sur Enter Appuyez sur MenuRéglage du programmateur d’extinction Regarder une émission de télévisionTexte plein é cran Sélection du mode de sous- titresSous-titres Réglage de l’image Sélection du mode AVParamè tre Dé placement vers La gauche La droite Appuyez sur Volume +/- pour ajuster le ré glageRéglage de la puce Enregistrement du mot de passeRéglage de la puce Modification du mot de passe Enregistrement du nom d’une station de télévisionPour changer l’affichage de la fonction d’é cran Ecrans de menuDépannage Regarder une source vidéo ou autreSpécifications Pour revenir à l’é mission té lé visé eTélécommande Composants et commandesPanneau frontal Panneau arrière