Actiontec electronic 56K manual Configuring Windows NT

Configuring Windows NT 4.0

Step 1 After you have installed the modem into your machine, turn on the power and allow the system to boot normally.

Step 2 Insert the installation CD_ROM. Now go to Start-Run. Type in “d:drivers\pciven\winnt\setupnt.exe” and click OK.

Step 3 After the program has finished unpacking the driver and setting it up, a screen like the one shown below will be displayed.

Step 4 Remove the installation CD-ROM from the CD-ROM drive. Click Finish to end the program and restart.

Step 5 After Windows NT restarts, go to Start-Settings-Control Panel and double-click the Modems icon.

Step 6 When the Install New Modem screen appears, allow Windows NT to detect your modem. Click the Next button.

12