Actiontec electronic 56K manual Product Registration, Safety Information

Page 4

Product Registration

The installation CD that came with your modem contains a file called registra- tion. This file will take you to the Actiontec web site:

http://www.actiontec.com/registration

Please fill in the required fields so that you can get prompt support and notifica- tion of periodic product upgrades.

Safety Information

This modem card is for use only in Personal Computers that have installation instructions detailing user installation of adapter cards.

DANGER:

Electrical current from power, telephone, and communication cables is hazardous. To prevent shock hazard, connect and disconnect cables as shown below when installing, moving or opening the covers of this product or attached devices. The power cord must be used with a properly grounded outlet.

To avoid shock hazard:

The power cord must be connected to a properly wired and earthed receptacle.

Any equipment to which this product will be attached must also be connected to properly wired receptacles.

4

Image 4
Contents Page Table Of Contents Contacting Actiontec Customer Support Safety Information Product RegistrationPage Product Features Package ContentsInstalling the Modem Hardware InstallationSystem Preparation For Windows 95/98/NTRemoving the Backplate Page Configuring Windows Device Driver Installation and ConfigurationConfiguring Windows 95 OSR2 Configuring Windows Configuring Windows NT Page Configuring DOS and Windows Found V.90 PCI Data/Fax Modem Port FC00 IRQ#Windows Configuring OS/2 Warp Apmdmcfg enterConfiguring UnixWare DEVICE=C\OS2\MDOS\VCOM.SYSConfiguring the Modem For Linux Verified for Red Hat 5.2 # mknod /dev/ttyS4 c 4 # mknod /dev/cua4 c 5 Setting up and using PPP Setting Up and Using PPP Minimal Setup Using the Gnome Dialer Applet Configuring And Using kpppSetting Up and Using The linuxconf Dialer Some General Tips Configuring Your Modem’s Country Code AT Commands Affecting ITU-T V.90 Operation S38 Default 56K Dial Line RateS109 default K56flex and V.90 Selection ExamplesHelp and Service Information No dial tone errorNothing appears on the screen when I type In terminal mode Communications software does not workOpen COM Port Error Message in W indows 95/98/NT Can’t Connect at 56K RatesReconfiguring a Windows Dial-Up Networking Connection Declaration of Conformity Telecommunications Regulations FCC Part 68 RequirementsIndustry Canada Class B Emission Compliance Statement
Related manuals
Manual 33 pages 1.47 Kb