Actiontec electronic 56K manual Product Features, Package Contents

Page 6

Product Features

The Actiontec 56K Internal PCI Modem contained in this package has the follow- ing features.

lConforms to the ITU-T V.90 specification with auto-negotiation of V.90, V.34, V.32bis, V.32, V.23, V.22bis, V.22, V.21, Bell 212A, and Bell 103 protocols.

lSupports Group 3: class 1 and 2 fax protocols.

lV.42bis and MNP 5 data compression. MNP2 - MNP4, V.42, and LAPM error correction.

lCompletely controller-based PCI modem for the widest range of supported operating systems:

DOS

Windows (3.1x, 95, 98, and NT) OS/2

UNIX Linux

Modem does not rely on the host CPU to perform any internal functions.

Package Contents

Before you begin the installation of the modem, make sure that you have the fol- lowing items that were included with your package.

lA 56K PCI Internal Modem.

lThis User’s Manual

lTelephone cord

lInstallation diskette or CD-ROM.

lSoftware License Agreement.

As you examine these items, look for any physical damage. Retain your proof of purchase and packaging material in the event that you need to return your 56K PCI Internal Modem.

6

Image 6
Contents Page Table Of Contents Contacting Actiontec Customer Support Safety Information Product RegistrationPage Product Features Package ContentsSystem Preparation Installing the ModemHardware Installation For Windows 95/98/NTRemoving the Backplate Page Device Driver Installation and Configuration Configuring WindowsConfiguring Windows 95 OSR2 Configuring Windows Configuring Windows NT Page Configuring DOS and Windows Found V.90 PCI Data/Fax Modem Port FC00 IRQ#Windows Configuring OS/2 Warp Apmdmcfg enterConfiguring UnixWare DEVICE=C\OS2\MDOS\VCOM.SYSConfiguring the Modem For Linux Verified for Red Hat 5.2 # mknod /dev/ttyS4 c 4 # mknod /dev/cua4 c 5 Setting up and using PPP Setting Up and Using PPP Minimal Setup Using the Gnome Dialer Applet Configuring And Using kpppSetting Up and Using The linuxconf Dialer Some General Tips Configuring Your Modem’s Country Code AT Commands Affecting ITU-T V.90 Operation S38 Default 56K Dial Line RateS109 default K56flex and V.90 Selection ExamplesNothing appears on the screen when I type In terminal mode Help and Service InformationNo dial tone error Communications software does not workOpen COM Port Error Message in W indows 95/98/NT Can’t Connect at 56K RatesReconfiguring a Windows Dial-Up Networking Connection Declaration of Conformity Telecommunications Regulations FCC Part 68 RequirementsIndustry Canada Class B Emission Compliance Statement
Related manuals
Manual 33 pages 1.47 Kb