Vivitek DVR5612 Teaching the remote control new functions, Using the universal remote control

Page 38

Programming the universal remote control

9

Teaching the remote control new functions

The remote control can learn up to 25 additional functions from the device’s original remote control.

Example:

Your DVD player remote control has a scan function that you may use

frequently. There is not a scan button on the remote control. You can assign a button and use the DVD remote to teach the remote control the scan function.

Important

Make sure that you have already programmed the remote control for the device. See “ Programming the universal remote control” on page 29.

Make sure that area lighting is not too bright or it will interfere with the learning process.

To teach the remote control a new function:

1 Press and hold the SETUP button on the remote control until the LED flashes twice.

2 Press 975. The LED flashes twice.

3 Press the device button that you want (DVD) once.

4 Press the button that you are assigning the new function to. The LED flashes quickly while it is waiting to receive the signal from the teaching remote.

5 Hold the teaching remote control approximately 1-inch (2.54cm) from the remote control making sure that the infrared ports are lined up, then press the button on the teaching remote that you want the remote to learn. The LED flashes twice.

6 Press the SETUP button to exit learning mode.

Using the universal remote control

Your RP TV features an on-screen display (OSD) that lets you adjust and save contrast, brightness, and other settings. The TV saves changes you make to the settings, even if you turn off the TV. See the documentation that came with your RP TV for more information about the OSD.

To access the OSD with the universal remote control:

1 Press the TV device button.

2 Press the MENU button on the universal remote control. The MAIN MENU opens.

3 Press the ▲and ▼ buttons to select the menu you want.

4 Press the ▲and ▼ buttons to select the menu option you want.

5 Press the OK button to open the menu.

6 Press the ◄and ► buttons to adjust the option settings.

7 Press the EXIT button to return to the MAIN MENU.

8 Press the EXIT button again. The MAIN MENU closes.

37

Image 38

Contents Page Accessories Check FCC WarningImportant Statement MaintenanceMaintenance for filter Clear methodsReplacement method of projection lamp Replacement ProcedureIndex Important StatementDisplay Modes Remote Control Correct viewingHandling Moisture CondensationSafety Instructions Warning and Caution Keep this device from high temperature or direct sunshine Do not touch the device and power cord while wetDo not stand or sit on this device Install this device in a flat and solid placeKeep the ventilation grill free Keep heavy objects off this deviceBe sure to remove the plug by holding the power cord plug OUT Connecting and Checking the AntennaConnection with Antenna Cable Front Connector System ConnectionStereo amplifier Rear ConnectorDVD, Satellite, Cable etc Speaker SystemRear Connector VOL Introduction the Control Panel and Remote ControlLamp / Power Status InputButton name Function VOLOperation status Machine status Lamp LED Power onPower off Recommended ways to learn about operations Example how to select correct input signal sourceBefore use OSD, You must know Quick Input Source select wayColor OSD explanationBrightness TintFor RGB, DVI input source mode Color TemperatureFor TV, AV, Comp input source mode Noise ReductionADC Phase Auto ConfigDefault ADC ClockSplit TransparencyPIP Close Caption Input SignalAnalog TV Setup Digital TV Setup Balance BassTreble SpeakerTV Rating Change Access CodeConfirm Access Code Mpaa RatingReset Lamp Timer OSD TimeoutReset ALL Setting OSD H PositionAmplifier and tuner codes Programming the universal remote controlDevice program codes Cable set-top box codesCD Player codes Computer and Home automation codesADC DVD Player codesReceiver codes JBLManufacturer Satellite set-top box codesTV codes KTV JCBKEC SSS CCE VCR codes MGA MEI HI-QKLH To search for a device code Searching for device codesReassigning device buttons To reassign device buttonsTo teach the remote control a new function Teaching the remote control new functionsUsing the universal remote control To access the OSD with the universal remote controlTo control PIP mode using the universal remote control Using picture-in-picture PIP modeSetting the sleep timer To set the sleep timer using the universal remote controlRemote control will not accept the device program code TroubleshootingLED doesn’t blink when a button is pressed Miscellaneous Default PC Input ModeVideo Input Format Specifications SUBIf following situations Please check the following itemsLED Status Error CodesStates Power LED Lamp LED Status Description Normal OperationAnnouncement Service Information and AnnouncementService Information Page Vivitek Corp Fremont Blvd Fremont, CA Tel 510 Efax 510