Sceptre Technologies X195 user manual Side Control Buttons, Rear View Mounting Pattern

SCEPTRE X195 HDTV User Manual

Side Control Buttons

1.POWER – Turn on the TV by pressing the button once. Press the button again to turn off the TV.

2.SOURCE – This button switches between all the different sources of the TV. The switching sequence is as follows: TV, AV, S-Video, YPbPr, VGA, and HDMI. When the OSD is active, this button acts as the enter button and confirms the menu selection.

3.MENU – This button activates the On Screen Display (OSD) menu. If a sub-menu is active, pressing this button will return selection to the previous menu level.

4.CH ▼– This button changes the TV channel downward. If the OSD menu is active, this button functions as down control for the menu.

5.CH▲ – This button changes the TV channel upward. If the OSD menu is active, this button functions as up control for the menu.

6.VOL(–)– This button decreases the TV’s volume. If a OSD menu is active, pressing this button will move the selection to the left.

7.VOL(+) – This button increases the TV’s volume. If a OSD menu is active, pressing this button will move the selection to the right.

Rear View Mounting Pattern

Mounting Specification: 100mm x 100mm using screw M4 (12mm) diameter screws. The 4 screws removed are for securing the TV stand only. If you are mounting the TV please consult a qualified installer for further instructions on bracket support and wall support.

- 10 -

www.SCEPTRE.com