Sceptre Technologies X195 user manual Safety Instructions

Page 4

SCEPTRE X195 HDTV User Manual

SAFETY INSTRUCTIONS

This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display. Keep these instructions in a safe place for future reference.

To avoid the risk of electric shock or component damage, switch off the power before connecting other components to the X195 LCD TV.

Unplug the power cord before cleaning the X195 LCD TV. Please use the included custom bezel cleaning cloth for cleaning the bezel of the X195 LCD TV only. Do not use a liquid or a spray cleaner for cleaning the product. Do not use abrasive cleaners.

Always use the accessories recommended by the manufacturer to insure compatibility.

When moving the X195 LCD TV from an area of low temperature to an area of high temperature, condensation may form on the housing. Do not turn on the X195 LCD TV immediately after this to avoid causing fire, electric shock or component damage.

Do not place the X195 LCD TV on an unstable cart, stand, or table. If the X195 LCD TV falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the X195 LCD TV.

Any heat source should maintain a distance of at least 5 feet away from the X195 LCD TV, i.e. radiator, heater, oven, amplifier etc. Do not install the product too close to anything that produces smoke or moisture. Operating the product close to smoke or moisture may cause fire or electric shock.

Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the X195 LCD TV and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the X195 LCD TV in a bookcase or cabinet unless proper ventilation is provided.

Never push any object into the ventilation slots of the X195 LCD TV. Do not place any objects on the top of the Product. It could short circuit parts causing a fire or electric shock. Never spill liquids on the X195 LCD TV.

Do not use the X195 LCD TV in a portrait format (by rotating 90 degrees) under high temperature environment (25°C or higher), since this would retard heat dissipation and would eventually damage the TV.

The X195 LCD TV should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

The power cable must be replaced when using different voltage from that specified in the User Manual. For more information, contact your dealer.

The X195 LCD TV is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire

- 4 -

www.SCEPTRE.com

Image 4
Contents Dear Sceptre Customer Important Information Safety Instructions Safety Instructions Page Television Antenna Connection Protection External Television Antenna GroundingInstallation Package ContentsOpening the Package Table of Contents Front View Identifying Front and Rear PanelMounting Preparations Side Control Buttons Rear View Mounting PatternRear View Connections Please NoteSceptre X195 Remote Control Installing Batteries to the Remote Control Freeze this Function is not Available in this ModelConnection Suggestions Connecting Power to the TVIf You Have Digital Cable without Cable Box or Antenna… Connecting DVD Player with Component YPbPr… Connecting DVD player with Composite… Connecting Cable or Satellite boxes with HDMI… Connecting to a PC with VGA and 3.5 mm minijack … Starting up the X195 LCD Hdtv Ready to Watch Some TV?If You’ve Connected Antenna or Cable to the TV… Page OSD On Screen Display Controls Via Remote ControlVia TV Side Panel Buttons OSD On Screen Display Options Video Main OptionAudio Main Option Time Main Option Setup Main Option Setup Parental Main Option TV Main Option Detailed Explanations Aspect Ratio ExplainedRating Explained Shortcuts to Browsing Channels Preset Modes Explained For VideoHow do I clean the TV ? Cleaning the bezel and remote controlCleaning the Screen For AudioTroubleshooting Guide bookHdcp Video Says no Call Us If You Need Help Specification Display panel Illustration4NTSC/ATSC Limited Product Warranty Disclaimer, Trademarks, & Copyright Information Unit FCC Compliance StatementEuropean Notice