Sceptre Technologies X195 user manual Rear View Connections, Please Note

Page 11

SCEPTRE X195 HDTV User Manual

Rear View Connections

1.POWER - This connection is for providing electricity to the TV. This connection connects to an AC power adapter which connects to the AC power source.

2.HDMI – HDMI connects to devices that use HDMI cable, such as Blu-ray or HD DVD player, or HD cable / satellite set-top box. This connection port receives pure digital audio and high definition signal through one single cable. This port also can accept a HDCP video device for video.

3.VGA Stereo Input - This connection port is for people who want to provide audio to the TV when using a PC or a DVI video device. The sources use 3.5mm mini-jack audio cable to provide audio for a HDCP enabled DVI video device or PCs with VGA connection.

4.VGA - This connection port connects to a PC for video using VGA cable. Be sure to connect your audio cable to the VGA Stereo input if you want sound out of VGA video source.

5.YPbPr – This connection port is for DVD players, or satellite / cable set-top boxes that use component cables. From right to left, connect green, blue, and red for video, and then connect white for left channel audio, and red for right channel audio. This connection shares the RCA red/white audio connection with AV and SVIDEO.

6.AV – Composite connects to devices that use composite video cables such as VCR or camcorder or video game consoles. This connection shares the RCA red/white audio connection with YPbPr and SVIDEO.

7.SVIDEO – This connection is for S-Video connector. The connection can be used for SVHS, DVD players. This connection shares the RCA red/white audio connection with AV and YPbPr.

8.Headphone – This connection is for audio output such as headphones.

9.TV – This connection is for digital or analog cable without the cable box or over-the-airwave antennas. The tuner is a hybrid tuner that tunes to both analog and digital channels. This connection uses coaxial RF cable. For over-the airwave digital stations please check http://www.antennaweb.org.

Please Note:

This TV features a power saving function which will turn off the TV automatically after 5 minutes of idling on a connection with no signal. This feature is present on all connection.

- 11 -

www.SCEPTRE.com

Image 11
Contents Dear Sceptre Customer Important Information Safety Instructions Safety Instructions Page External Television Antenna Grounding Television Antenna Connection ProtectionOpening the Package Package ContentsInstallation Table of Contents Mounting Preparations Identifying Front and Rear PanelFront View Rear View Mounting Pattern Side Control ButtonsPlease Note Rear View ConnectionsSceptre X195 Remote Control Freeze this Function is not Available in this Model Installing Batteries to the Remote ControlIf You Have Digital Cable without Cable Box or Antenna… Connecting Power to the TVConnection Suggestions Connecting DVD Player with Component YPbPr… Connecting DVD player with Composite… Connecting Cable or Satellite boxes with HDMI… Connecting to a PC with VGA and 3.5 mm minijack … If You’ve Connected Antenna or Cable to the TV… Ready to Watch Some TV?Starting up the X195 LCD Hdtv Page Via TV Side Panel Buttons Via Remote ControlOSD On Screen Display Controls Video Main Option OSD On Screen Display OptionsAudio Main Option Time Main Option Setup Main Option Setup Parental Main Option TV Main Option Aspect Ratio Explained Detailed ExplanationsRating Explained Shortcuts to Browsing Channels For Video Preset Modes ExplainedFor Audio How do I clean the TV ?Cleaning the bezel and remote control Cleaning the ScreenGuide book TroubleshootingHdcp Video Says no Call Us If You Need Help Display panel Illustration Specification4NTSC/ATSC Limited Product Warranty Disclaimer, Trademarks, & Copyright Information European Notice FCC Compliance StatementUnit