SCEPTRE X195 HDTV User Manual
1.Make sure the power of X195 LCD HDTV is turned off.
2.Connect the Coaxial RF cable from your antenna or digital cable to the TV port on the back of your X195 LCD HDTV.
3.Turn on X195 LCD HDTV.
4.Select TV (Air) for antenna or TV (Cable) for digital cable from either your remote control’s source button or source button on the TV.
5.Use the On Screen Display to scan for channels.
Please Note :
•Not all broadcasts are in High Definition (HD). Please refer to your local broadcasting stations for more information.
•The X195 LCD HDTV’s tuner is designed for HDTV therefore requires a stronger signal than normal TVs. If you cannot achieve that signal level with your antenna or cable, your X195 LCD HDTV might lose picture or sound.
Connecting DVD Player with Component YPbPr…
1.Make sure the power of X195 LCD HDTV and your DVD player is turned off.
2.Obtain a Component Cable. Connect the green color connector to both your DVD player and YPbPr’s green connector port on the back of your X195 LCD HDTV.
3.Connect the blue color connector to both your DVD player and YPbPr’s blue connector port on the back of your X195 LCD HDTV.
4.Connect the red color connector to both your DVD player and YPbPr’s red connector port on the back of your X195 LCD HDTV.
5.Obtain a RCA Audio Cable. Connect the white color connector to both your DVD player and YPbPr’s white connector port on the back of your X195 LCD HDTV.
6.Connect the red color connector to both your DVD player and YPbPr’s red connector port on the back of your X195 LCD HDTV.
7.Turn on the X195 LCD HDTV and your DVD player.
8.Use the remote control’s source button or the source button on the TV to switch to YPbPr.
Please Note :
•Please reference the DVD player’s manual as well, to make sure the DVD player is configured to output correctly to the TV.
•This connection shares the same audio plugs with SVIDEO and AV. You can only use one of the three connections.
- 15 -
www.SCEPTRE.com