SCEPTRE X195 HDTV User Manual
Ready to Watch Some TV?
Starting up the X195 LCD HDTV
1.Make sure your power cable is connected and the standby red light in the front of the TV is lit up.
2.Check all your connection cables off the side or the back of your TV and also your AV devices. Make sure they are all connected securely.
3.Turn on your TV and other AV devices if necessary.
4.Select the correct source according to the Connecting pages.
If You’ve Connected Antenna or Cable to the TV…
If an antenna or cable (without a cable box) is connected to your TV’s tuner, you will need to go through a setup process in order to watch the TV. When you turn on the TV for the first time, follow through the instructions below to complete the setup and your TV will be ready for viewing.
1.Locate your X195 remote control, and press MENU to start the setup. Use the ◄ or ► button to select the dish icon labeled TV and press ↵.
2.Use the ▲ or ▼ button to select TUNER MODE and use the ◄ or ► button to select Cable or Air.
- 19 -
www.SCEPTRE.com