Sceptre Technologies X195 user manual Hdcp Video Says no

		SCEPTRE X195 HDTV User Manual
Problems	Solutions
HDCP VIDEO SAYS NO	Reboot your HDCP video device but turning them off and unplugging the
HDCP SUPPORT	power cord. Wait up to 8 minutes to plug the power back in to see if it
	works or not.
	Make sure you have a 3.5 mm mini-jack cable connected from your
HDCP VIDEO HAS NO	HDCP video device’s sound output to the TV’s VGA STEREO INPUT. If
AUDIO	your HDCP video device uses RCA AUDIO jacks, you’ll need to obtain a
	RCA audio converted into 3.5 mm mini-jack cable.
CANNOT GET	1360x768 is a widescreen resolution. If your video card cannot achieve
1360x768 ON PC VGA	the resolution, please try updating the video card’s drivers to the newest
	version. If that does not work, you’ll need to think about upgrade the
	video card to one that is capable of achieving that resolution.
PICTURE IS	This might be from interference from large electrical appliances, cars,
DISTORTED OR HAS	motorcycles, or fluorescent lights. If the TV is close to the wall, try
ABNORMAL SOUND	moving the TV to another room in your house to see if the problem still
	occurs.
	If you’re using HDMI or a TV digital channel make sure you use the
	ASPECT button to switch to FULL format. If you are using VGA, use the
PICTURE DOES NOT	AUTO ADJUST function to adjust to the screen. Please Note : If you
	are using regular analog TV, AV, or component in 480i resolution, use
COVER THE ENTIRE	the ASPECT button to switch to FULL in order to fill up the screen.
SCREEN	Please Note : This note this feature will distort the picture.
	For best image quality, view HD widescreen programs where possible. If
	HD content is not available view “Standard Definition” from a digital
PICTURE QUALITY IS	source. Standard, analog TV will always be noticeable inferior to HD
HORRIBLE!!	because your X195 LCD HDTV has video that is many times better than
	old TV’s and so you can see interference and deficiencies you did not
	KNOW you had.
PICTURE HAS PIXELS	Your X195 LCD HDTV is manufactured using an extremely high level of
THAT ARE ALWAYS	precision technology, however, sometimes some pixels of your X195
DISPLAYING THE	LCD HDTV may not display. Pixels defects within industry specifications
SAME COLOR	are inherent to this type of product and do not constitute a defective
	product.
SWITCHING A CHANNEL		Different channels and inputs will sometimes have this effect because
OR SOURCE CHANGES		the channel signal’s own volume is already loud. There is no way
THE VOLUME		remove this completely. The TV has an AUTO VOLUME LEVEL
		function that can combat this type of effect. Please make sure that
		function is turned on.
THERE IS NOISE OR		When your LCD HDTV’s resolution is higher than the digital channel’s
TRASH PIXELS ON THE		broadcast resolution, the signal is up-converted to match your TV’s
SCREEN		resolution. Up-converting can cause this type of effect.
TIPS FOR HIGH		The X195 LCD HDTV is an ideal platform for viewing High Definition
DEFINITION USERS		Content. The best image quality can be achieved by HDMI, YPbPr
		(Component), then VGA. However, due to variances in broadcast
		practices, it is possible some image distortions can occur.
TIPS FOR LETTERBOX		Letterboxed (Widescreen) versions of DVD movies are most commonly
CONTENT USERS		formatted for standard 4:3 TVs. The X195 LCD HDTV has the
		capability of expanding this content so the entire screen is filled at the
		expense of the image proportion. To use this function press the aspect
		button on the remote control and cycle among the available options.
I CANNOT FIND THE		The buttons are represented by the ▲▼◄► buttons located on the
VOLUME AND CHANNEL		remote control. ▲▼ changes the channels and ◄► changes the
CHANGING BUTTONS		volume.
I CANNOT FIND ENTER		The enter button has the symbol ↵. It is located in the center of the
BUTTON		▲▼◄► buttons.
TV TURNS OFF		The TV features a power saving mode which will automatically turn off
AUTOMATICALLY		the TV, if there’s no signal provided for more than 5 minutes.
AFTER 5 MINUTES

- 35 -

www.SCEPTRE.com