Sceptre Technologies X195 user manual Connecting to a PC with VGA and 3.5 mm minijack …

SCEPTRE X195 HDTV User Manual

Connecting to a PC with VGA and 3.5 mm minijack …

1.Make sure the power of X195 LCD HDTV and your PC is turned off.

2.Obtain a 15-pin D-Sub VGA cable; connect to the VGA output of your PC and the other end to the VGA port on the back of your X195 LCD HDTV.

3.Obtain a 3.5 mm Mini-jack, connect to the audio out of your PC and the other end to the VGA Stereo Input port.

4.Turn on the power of the X195 LCD HDTV and your PC.

5.Use the remote control’s source button or the source button on the TV to switch to VGA.

6.Change your PC resolution to 1360x768 at 60hz refresh rate.

7.Press MENU to use the OSD’s SETUP option.

8.Under the SETUP option select PC function.

9.Under PC function use AUTO ADJUST to adjust the screen.

Please Note :

•Please refer to your PC manual for video output requirements of the video card.

•The VGA port of the TV features a power saving mode which will automatically turn off the TV, if there’s no signal provided for more than 5 minutes.

- 18 -

www.SCEPTRE.com