Loewe 46, 40 manual Positioning/aligning DVB-T antenna, General information on menu operation

Initial installation Operating convenience

Positioning/aligning DVB-T antenna

If you are receiving one or more DVB-T stations with picture and sound interference then you should change the installation location and align- ment of the antenna. Ask your dealer to tell you which channels are used to broadcast the DVB-T stations in your region.

➠In normal TV mode, without other displays. A DVB-T station is received and selected.

Call TV menu.

34Select Settings,

6 go to the menu line below.

34Select Stations,

6go to the menu line below.

34Select Manual adjustment, OK call manual adjustment.

Signal source

Select the area in which you want the broadcaster to search here. You can

use the button to automatically select station by station.

Manual adjustment
Signal source	DVB-T		DVB-C	DVB-S	A
Channel	E05
Frequency	177.50 MHz
Bandwidth	7 MHz
Name	12 Test
C/N 96	Level 99
		Overwrite station		END
		Search		INFO

The signal source is already on DVB-T due to the station preselection.

Position and align the antenna in such a manner that maximum values for C/N and Level are obtained.

Blue button: Start search.

Search for DVB-T stations one after another and compa- re values for C/N and Level.

Then position/align the antenna to the weakest station so that maximum values for C/N and Level are obtained.

Thereafter perform an automatic search for all DVB-T stations, see page 22.

Explanation of the setting possibilities:

Bandwidth Depending on the selected channel and country the associated bandwidth of 7 or 8 MHz will be set auto- matically.

General information on menu operation

Use the MENU button to call menus for the various modes. Additional menus can be called directly with the remote control.

The menus are displayed at the bottom of the screen. At the top you get additional information about the selected menu item (see info display on page 14).

➠In normal TV mode, without other displays.

Call TV menu.

Picture

Here you can adjust among other things: Contrast, colour, brightness, picture adjustment, sharpness, picture format.

TV menu				INFO END
Picture		Sound	Recording	Connections	Settings
Picture adjustment	...

Example: Selecting and executing functions

34Select Picture,

6 go to the menu line below.

34Select Brightness,

6go to the menu line below.

34Set Brightness.

Go to theBrightness menu line to make other picture settings.

34Select more ... ,

OK call more ... functions.

34Select Auto format,

6go to the menu line below.

34Select on / off.

Conclude the settings.

Inputs via numeric buttons

Letters have to be entered for specific functions. Like using a mobile phone keypad (1 to 9), press a numeric button until the desired character appears.

The available letters are imprinted on the individual numeric buttons.

13 -