Loewe 46, 40 With Teletext various character sets are, Amplifier, Button, Connection diagram

Troubleshooting

Problem	Possible cause	Remedy
Digital Link Plus does not work.	a) EURO-AV cable is not fully wired (pin 10 not	a) Replace the EURO-AV cable.
	wired).
	b) Some recorders can only adopt stations	b) Restore the recorder to the as-delivered
	during the initial installation of the TV set.	state (see recorder's operating manual).
With Teletext various character sets are	The wrong character set has been set in the	Set the right character set: Teletext menu -
displayed incorrectly.	Teletext menu.	Settings - Character set: Select Standard or the
		appropriate character set.
No sound via the external digital audio	a) The external digital audio amplifier does not	a) Set PCM stereo on the DVD player in the
amplifier.	support the selected sound format (Dolby	sound selection. For DVB stations on the TV
	Digital, dts, MPEG).	set switch to stereo in the status display
		(END) – language/sound selection (Green
		button)
	b) TV set and external digital audio amplifier are	b) Connect Digital-Outfrom the TV set to a
	not connected with each other.	Digital-Ininput of the external digital audio
		amplifier and select the appropriate input
		to this.
The picture of an additional device can be	The device is not registered in the connection	In the connection wizard (TV menu →
seen but the timer cannot be called.	wizard or is connected differently from shown	Connections → New devices/modifications)
	in the connection diagram.	compare the connection diagram with the
		actual installation and connect as shown if
		necessary (page 35).
The picture of an additional device can be	The device is not registered in the connection	In the connection wizard (TV menu →
seen, however the error message no recorder	wizard or is connected differently from shown	Connections → New devices/ modifications)
available is output.	in the connection diagram.	compare the connection diagram with the
		actual installation and connect as shown if
		necessary (page 35).
Photos on the USB stick are not displayed	The photo is not available in a displayable	Convert photo file into a standard JPG format
correctly in the PhotoViewer or a	format.	on the PC.
"?" appears.

53 -