Loewe 46, 40 manual Digital audio signal, AV sockets, 34Select and adapt the Geometry

Page 38

Operating additional equipment

Connecting the audio signal from the PC or from the SetTopBox Analogue audio signal:

Connect the analogue audio signal from the PC or the SetTopBox via stereo cable to the AUDIO IN2 jack on the TV set.

The sound is played via the speakers connected to the TV set or a speaker system.

Digital audio signal:

An external digital audio signal can be reproduced via the integrated Dolby Digital Decoder or via an externally connected digital audio amplifier.

Connect the digital audio signal from the PC or the SetTop-Box via a simple cinch cable to the AUDIO DIGITAL IN socket on the TV set.

The digital audio input can be assigned to the PC IN socket by the TV menu Connections Miscellaneous Assign digital audio input, see page 45.

For an external digital audio amplifier:

External audio amplifier is already set in the sound components wizard (see page 44).

Feed the digital audio signal of the AUDIO DIGITAL OUT socket on the TV set to the external amplifier.

Connecting devices to the Component IN connection and playback

DVD players/recorders with component video connec- tions can also be connected to the Cb/Pb Cr/Pr Y sockets (SD/HD-COMPONENT) of the TV set instead of to the EURO

AV sockets.

The connecting cable with three cinch plugs transmits the picture in- formation in better quality than is transmitted by a EURO AV cable. You need an additional cable for audio transmission.

Connecting the device

Connect the component video outputs of the external device via a triple cinch cable to the Cb/Pb Cr/Pr Y sockets on the TV set.

Connect the analogue audio outputs of the external device to the AUDIO IN1 L/R sockets on the TV set.

The sound is played over the speakers of the TV set (only with connected TV speakers) or over a speaker system.

Alternatively, connect the digital audio output of the exter- nal device to the AUDIO DIGITAL IN socket of the TV set.

Call TV menu.

34Select Connections,

6 go to the menu line below.

34Select New devices/modifications.

OK calls the wizard.

OK Go to the AV equipment selection menu. Select device at COMP.IN.

Yellow button: Activate COMP. IN.

Leave the signal type at socket COMP. IN in the connection wizard on Automatic for the time being.

If necessary change it to: SDTV, HDTV or ProScan. (Additional information is available in the operating manual for the connected device.)

In an analogue audio connection, the sound is auto- matically played over the speakers of the TV set (only if TV speakers are connected) or over a speaker system.

A digital audio signal must be assigned via the TV menu

Connections Miscellaneous Assign digital audio input to the COMP. IN socket, see page 45.

Playback from the device

Call AV selection.

AV selection

 

VIDEO VCR DVD AVS PC IN HDMI1

MI2/DVI COMP. IN

OK

34Select COMP. IN socket, OK to switch over.

Adapting the geometry (only possible with certain signals)

This is where the picture can be properly positioned and the position of the picture (horizontal and vertical) can be moved so that it fills the entire screen.

Call TV menu.

34Select and adapt the Geometry.

- 38

Image 38
Contents Operating Instructions Contents Remote Control TV Functions Display Control unit front side of the deviceButton M Button +AV1 DVD player Factory settingsConnections rear side of the device AV2 DVD recorderWelcome Info display and TV index Operating convenience with wizardsWizards in overview Air circulation and high temperatures For your safetyPower supply Proper use and environmental conditionsCleaning Repairs and accessoriesVolume SupervisionPreparing the remote control unit Initial installationInstalling the TV set Connecting the TV setFirst installation wizard Turning the set on/offDVB-S line Explanations of the setting possibilitiesAntenna/cable analogue analogue stations via Explanations of the DVB-T antennaPositioning/aligning DVB-T antenna General information on menu operationIndex in the TV set Operating convenienceInfo display TV menu Overview diagram Radio menu Overview diagramDaily operation Select stationSelect video source Adjusting the sound Adjusting the picture Operation without remote controlButton functions Additional selection possibilities for DVB stations Explanations of the symbols for sound identificationStatus display Yellow button Time selection Blue buttonManaging stations TV stations3456or numeric buttons Search/update station manual searchChange, delete, move, rename, restore stations Delete stationPut together change favourites lists Red button Activates Clear favourite list Add station to favourites listDelete station from favourites list Move / change order of stations in the favourites listPicture in Picture Picture in Picture PIPConfigure Picture in Picture PIP mode Electronic Programme Guide Electronic Programme Guide EPGProgramming a recording for a recorder Configuring EPGCalling additional information about the programmes Start the EPG menuTeletext TeletextStarting the Teletext menu Programming timer recordings via TeletextTeletext menu Explanations of the Teletext menu functionsConditional Access Module CA module Software update Radio mode RadioDevice connection wizard Connecting additional devices to the TV setOperating additional equipment Call TV menu 34Select ConnectionsConnection possibilities for a DVD/video recorder Explanations of important settingsConnecting antenna to the DVD/video recorder Manual station searchConnecting devices to the PC in connection and playback AV sockets Digital audio signalDigital audio signal must be assigned via the TV menu 34Select and adapt the GeometryIntegrated Dolby Digital Decoder Sound components wizardTV speakers Components wizard SetupConnecting Connected to the subwoofer of the Individual sound system34Select Sound components Adjusting the speaker systemCalling the sound components wizard Sound playback via ... speakers system34Select Configuration/modification 34Select External speakersOK continue to set OK continue to Adjust speaker levelOK continue to Subwoofer phase Distance from the left front speakerConnecting analogue audio amplifiers Connecting audio amplifiersConnecting digital audio amplifiers Mark the HiFi/AV amplifierAssignment of the digital audio input Audio connection in Hdmi DVI devicesDirect way to record Timer recording with external devices PhotoViewer Starting a slide show Open folderMarking photos for slide show Calling the PhotoViewer menuUsing the remote control for the TV set Using the remote control for a DVD playerUsing the remote control for a recorder Operating Loewe equipmentRotating the TV set Troubleshooting With Teletext various character sets are Connection diagramAvailable is output Connection diagram AmplifierElectrical data Technical dataGeneral data ConnectionsSetup possibilities AccessoriesAccessories Cinch cable Cable for transmitting audio or video Conditional Access Module See CA moduleGlossary CI slot See Common InterfaceOffers the user additional use possibilities JPG See JpegPicture in Picture see PIP HD analogue TV analogueTV digital HD digitalIndex Plac Kaszubski ServiceService Center Loewe