Operating additional equipment
Assignment of the digital audio input
Your TV set can assign an AV input to the digital audio input socket AU- DIO DIGITAL IN. When switching over to this AV input, the digital audio signal at the AUDIO DIGITAL IN input is passed on to the integrated Dolby Digital Decoder and the digital audio output socket AUDIO DIGITAL OUT. You will hear the digital sound of the assigned AV input, if available, in place of the analogue sound.
Connecting devices to the digital audio input
You must feed the digital audio signal to the TV set for sound reproduc- tion from an external device, e.g. from the DVD player.
Reproduction of the external digital audio signal can be played back via the Dolby Digital Decoder integrated in the TV set or via an externally connected digital audio amplifier.
➠If an external audio amplifier is used, this must be regis- tered in the sound components wizard (see page 44).
Call TV menu.
34Select Connections,
6 go to the menu line below.
34Select Miscellaneous,
6go to the menu line below.
34Select Assign digital audio input,
6 go to the menu line below.
34Select AV input.
| TV menu |
|
|
|
|
| Connections |
|
|
|
|
| Miscellaneous |
|
| INFO | END |
no | Assign digital audio input | to AV2 | to AVS | to HDMI1/DVI | to HDM |
to AV1 |
To connect a DVD player to the digital audio input of the TV set for example, connect the digital output socket of the DVD player (DIGITAL OUT) via a cinch cable to the AUDIO DIGITAL IN socket on the TV set.
TV set
|
|
|
|
|
|
|
| AUDIO DIGITAL IN |
AV1 |
|
|
|
|
|
|
|
|
|
| MULTICHANNEL AUDIO OUT |
|
|
|
| ||
|
| LEFT | CENTER | LEFT |
|
|
| I |
|
| REAR |
| FRONT |
|
|
| |
DIGITAL AUDIO OUT |
|
|
| STEREO OUT | VIDEO OUT | |||
PCM/MPEG2/AC3/DTS |
|
|
| |||||
MAINS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| II |
|
|
|
|
|
|
|
| TO |
| DIG OUT | RIGHT | SUBW. | RIGHT | R | L | (CVBS) | (Y/C) |
OPT OUT | REAR |
| FRONT |
| AUDIO | VIDEO OUT | ||
DVD player
The DVD player is already registered at AV1 in the connection wizard at the factory.
If new devices are connected and registered in the connection wizard, the digital audio input AUDIO DIGITAL IN is assigned in the connection wizard (see page 36).
Audio connection in HDMI (DVI) devices
Devices with DVI connection
If an external device with DVI interface is connected via a HDMI/DVI adapter to the HDMI1/DVI or HDMI2/DVI socket of the TV set, you can connect the digital sound of the external device to the digital audio input socket AUDIO DIGITAL IN.
The assignment of the digital audio input to the corresponding HDMI socket of the TV set takes place as described in the column on the left.
If you want to use the analogue sound of the external devices, connect it to the AUDIO IN2 socket.
Devices with HDMI connection
If external devices with HDMI interface are connected to the HDMI1/DVI or HDMI2/DVI socket of the TV set, no assignment of the audio input is necessary because the digital transmission of picture and sound takes place via one connection in HDMI.
45 - 