Loewe 46, 40 manual Troubleshooting

Troubleshooting

Problem	Possible cause	Remedy
All menus are displayed in the wrong language.	The menu language was set incorrectly.	Set the menu language:
		Press the INFO button in TV mode (Index).
		Mark the first key word and call it with OK.
		Then select the language and confirm it with
		OK.
In the TV menu, Connections cannot be called	A timer recording is in progress.	Wait until the timer recording ends or delete
(displayed in grey).		the timer recording (page 47).
The control functions of the Loewe Recorder	a) The Digital Link function is not activated or	a) Activate Digital Link in the recorder (see
and the Timer are not working or are not	not possible in the recorder.	operating instructions of the recorder).
working properly	b) EURO-AV cable is not connected.	b) Connect EURO-AV cable (page 35).
	c) Recorder is not logged in.	c) Register recorder (page 35).
General problems when connecting external	a) The device is not logged in to the connection	a) In the connection wizard (TV menu →
devices via an AV input.	wizard or is connected differently from	Connections → New devices/modifications)
	shown in the connection diagram.	compare the connection diagram with the
		actual installation and connect as shown if
		necessary (page 35).
	b) The AV standard is set incorrectly.	b) Set the correct standard (page 15).
	c) The signal type is set incorrectly.	c) Set the correct signal type (page 35).
		If for AV standard or AV signal Automatic is
		set then this can cause errors to be
		detected with signals that do not comply
		with standards. In this case standard and
		signal must be set according to the
		information in the operating manual of the
		external device.
The connection of a decoder does not function	a) The signal is not decoded because the	a) Follow the instructions in the connection
or does not function properly.	correct decoder stations have not been	wizard (TV menu → Connections → New
	selected in the connection wizard.	devices/modifications) and select the
		appropriate decoder station (page 35).
	b) In decoder mode the sound is missing	b) Follow the instructions in the connection
	because the wrong decoder sound has been	wizard and select the right audio source
	assigned in the connection wizard.	(Decoder, TV oder Autom.) (page 35), see
		the decoder manual.

- 52