Loewe 46, 40 manual Rotating the TV set

Page 51

Operating additional equipment

Rotating the TV set

Your TV set has a connection for a rotating stand control. If the set is mounted on a motorised stand, you can use the remote control to adjust it to your seating location accordingly.

➠A motor unit is connected.

➠In normal TV mode, without other displays.

34Rotate the TV set.

Do not place any objects in the rotation range of the TV set that could obstruct the rotation or that could be knocked over by the rotation movement.

Setting the range of rotation

You can specify the rotation range of the TV device (maximum +/- 40 degrees) by setting the maximum right and left stop position.

Call TV menu.

34Select Settings,

6 go to the menu line below.

34Select Miscellaneous,

6go to the menu line below.

34Select Rotate TV,

6go to the menu line below.

34Select Basic adjustment, OK calls the basic adjustment.

Rotate TV

 

Basic adjustment (right)

END

21

 

OK Proceed

 

4Basic adjustment (right)

Turn your TV set as far to the right as the installation position of your set allows. This will be the maxi- mum right rotation position in future.

OK confirms basic adjustment to right.

Rotate TV

 

Basic adjustment (left)

END

-30

 

OK End of basic adjustment

 

3Basic adjustment (left)

Turn your TV set as far to the left as the installation position of your set allows. This will be the maximum left rotation position in future.

OK ends the basic adjustment. Close the menu.

Specifying the switch off position

This is where you specify the position that the TV will take when it is switched off. In order for the TV set to return to the determined switch-off position when switching it off, this must be activated (see below).

Call TV menu.

34Select Settings,

6 go to the menu line below.

34Select Miscellaneous,

6go to the menu line below.

34Select Rotate TV,

6go to the menu line below.

34Select Set switch-off position, OK calls Set switch-off position.

TV menu

Settings

Miscellaneous

Rotate TV

Set switch-off position

INFO

END

0

OK Adopt

34Setdesired switch-off position.

The TV set rotates in the process.

OK accepts the set position.

Close the menu.

Activating the switch-off position

Call TV menu. 34Select Settings,

6 go to the menu line below.

34Select Miscellaneous,

6go to the menu line below.

34Select Rotate TV,

6go to the menu line below.

34Select Activate switch-off position,

6go to the menu line below.

34Select yes.

Close the menu.

If the TV set is switched off with the on/off key on the remote control or with the switch integrated in the display then it will turn to the defined switch-off position. When it is switched back on, it returns to the posi- tion last set.

51 -

Page 50 Page 52
Image 51
Page 50 Page 52
Contents Operating Instructions Contents Remote Control TV Functions Button + Control unit front side of the deviceButton M DisplayAV2 DVD recorder Factory settingsConnections rear side of the device AV1 DVD playerWelcome Operating convenience with wizards Wizards in overviewInfo display and TV index Proper use and environmental conditions For your safetyPower supply Air circulation and high temperaturesSupervision Repairs and accessoriesVolume CleaningConnecting the TV set Initial installationInstalling the TV set Preparing the remote control unitTurning the set on/off First installation wizardExplanations of the DVB-T antenna Explanations of the setting possibilitiesAntenna/cable analogue analogue stations via DVB-S lineGeneral information on menu operation Positioning/aligning DVB-T antennaOperating convenience Info displayIndex in the TV set Radio menu Overview diagram TV menu Overview diagramSelect station Daily operationSelect video source Adjusting the sound Operation without remote control Adjusting the pictureButton functions Yellow button Time selection Blue button Explanations of the symbols for sound identificationStatus display Additional selection possibilities for DVB stationsTV stations Managing stationsDelete station Search/update station manual searchChange, delete, move, rename, restore stations 3456or numeric buttonsPut together change favourites lists Move / change order of stations in the favourites list Add station to favourites listDelete station from favourites list Red button Activates Clear favourite listPicture in Picture PIP Picture in PictureConfigure Picture in Picture PIP mode Electronic Programme Guide EPG Electronic Programme GuideStart the EPG menu Configuring EPGCalling additional information about the programmes Programming a recording for a recorderTeletext TeletextExplanations of the Teletext menu functions Programming timer recordings via TeletextTeletext menu Starting the Teletext menuConditional Access Module CA module Software update Radio Radio modeCall TV menu 34Select Connections Connecting additional devices to the TV setOperating additional equipment Device connection wizardManual station search Explanations of important settingsConnecting antenna to the DVD/video recorder Connection possibilities for a DVD/video recorderConnecting devices to the PC in connection and playback 34Select and adapt the Geometry Digital audio signalDigital audio signal must be assigned via the TV menu AV socketsSound components wizard TV speakersIntegrated Dolby Digital Decoder Connected to the subwoofer of the Individual sound system SetupConnecting Components wizardSound playback via ... speakers system Adjusting the speaker systemCalling the sound components wizard 34Select Sound components34Select External speakers 34Select Configuration/modificationDistance from the left front speaker OK continue to Adjust speaker levelOK continue to Subwoofer phase OK continue to setMark the HiFi/AV amplifier Connecting audio amplifiersConnecting digital audio amplifiers Connecting analogue audio amplifiersAudio connection in Hdmi DVI devices Assignment of the digital audio inputDirect way to record Timer recording with external devices PhotoViewer Calling the PhotoViewer menu Open folderMarking photos for slide show Starting a slide showOperating Loewe equipment Using the remote control for a DVD playerUsing the remote control for a recorder Using the remote control for the TV setRotating the TV set Troubleshooting Amplifier Connection diagramAvailable is output Connection diagram With Teletext various character sets areConnections Technical dataGeneral data Electrical dataAccessories AccessoriesSetup possibilities CI slot See Common Interface Conditional Access Module See CA moduleGlossary Cinch cable Cable for transmitting audio or videoJPG See Jpeg Picture in Picture see PIPOffers the user additional use possibilities HD digital TV analogueTV digital HD analogueIndex Service Service Center LoewePlac Kaszubski
Top Page Image Contents