DVB
Conditional Access Module (CA module)
In order to receive coded digital stations, a Conditional Access Module (CA module) and a Smart Card must be inserted in the CI slot of your TV set (see page 5).
The CA module and the Smart Card are not part of the TV set's scope of delivery. They are usually available from your dealer. Loewe provides no guarantee for the functioning of the CA module.
Inserting the Smart Card into the CA module
Push the Smart Card into the CA module as far as it goes so that the side with the gold coloured contact chip is facing the side of the CA module marked with the provider's logo. Note the direction of the arrow printed on the Smart Card.
Inserting the CA module in the CI slot
➠Switch off the TV set's mains switch. Remove the cover from the rear of the set.
Ejector button
Cover
Carefully insert the CA module in CI slot 1 or CI slot 2 with the contact side forward.
If you are standing in front of the TV set (display) then the logo on the CA module must be pointing to the rear. Do not use force. Make sure the module is not twisted in the process. If the CA module is correctly installed, the ejector button protrudes a little further.
Replace the cover.
Searching for encrypted stations
➠The search wizard must only be started if the setting option no has been selected during first installation in the search for encrypted stations or no
Call TV menu.
34Select Settings,
6 go to the menu line below.
34Select Stations,
6go to the menu line below.
34Select Search wizard,
6go to the menu line below.
34Select Change search settings, OK wizard prompts search settings.
See page 24 for a description of the search settings.
Calling CA module information
➠This menu is only available for digital stations.
Call TV menu.
34Select Settings,
6 go to the menu line below.
34Select Miscellaneous,
6go to the menu line below.
34Select CA module: xxx
(xxx corresponds to the CA module provider), OK to call information.
The content of this menu depends on the provider of the CA module.
Removing the CA module
➠Switch off the TV set's mains switch. Remove the cover from the rear of the set.
Press in the ejector button on the appropriate module drawer, the module is released.
Remove the module from the set. Replace the cover.
- 34