Loewe 32959022 manual Software update

Page 35

DVB

Software update

TV base software and DVB software

You can update your TV’s base and DVB software. The latest software versions are broadcast by satellite (only Astra1 at the moment) or can be installed in your set with a USB stick.

Please contact your dealer for a software update via USB stick.

➠Location of TV set UK or IRL: With the DVB software update either MHEG-5 or DVBi3 is updated depending on the selection during the first installation. After this update it is not possible any longer to switch between MHEG-5 or DVBi3 software via first installation.

➠MHEG-5 software update only available via USB stick and DVB-T.

Automatic search for new software via satellite

If your set has a retrofitted satellite tuner, it determines overnight whether a new software version is available via satellite. However the TV set must remain in standby mode for this (do not switch off the set with the mains switch).

If a new software version has been found, the set informs you with an on-screen message the next time it is switched on (see right column

– Loading new software).

Manual search for new software via USB / satellite

If it is not automatically displayed that a new software is available when switching on the set, you can also run a manual search.

The system first checks whether a software update is available on an inserted USB stick. If not the system will search for an update via satellite.

Call TV menu.

34Select Settings,

6 go to the menu line below.

34Select Miscellaneous,

6go to the menu line below.

34Select Software update.

OK calls software update wizard.

The software versions currently loaded in the set are listed.

Software update wizard

 

Current TV base software:

V2.1.0

Current DVB software:

V1.3.0

You can now search for new software. Please select the software type and start the search with the OK button.

Software update

Software type

TV base software

OK

END

 

DVB software

OK Proceed

Select software type:

Select TV base software or

DVB software,

OK start search.

If new versions are available then a subsequent screen message will be displayed.

Loading new software

➠New software available via search.

➠If a new TV and a new DVB software is available in the automatic search for new software versions via satellite (1, you can select the software type to be updated.

Software update wizard

A new software is available.

TV base software:

current V2.1.0

new V2.1.1

Please specify whether and, if so, when you want to load the new software.

Software update

Update options

Load new software now

OK

Load new software after switch off to standby

END

 

Keep current software

 

OK Proceed

 

Select update option:

Load new software now

Load new software after switch off to standby (update after switching off)

Keep current software (no update desired).

OK more or exit wizard.

OK start software update.

A bar is displayed to inform you about the progress of the load process. During the loading process do not switch off your device via the mains switch! This may last up to 20 minutes. You will be informed when it is finished.

At the end of loading:

Turn off the TV set off with the mains switch and turn it on again. This is not necessary when loading the software with the update option Load new software after switch off to standby mode.

If a new software has not been updated via satellite (1, you will be reminded of this several times when switching on the set.

35 -

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Operating instructions Contents Remote Control TV Functions Display Control unit front side of the deviceOn/Off button Button MSD/HD-COMPONENT in Cb/Pb-Cr/Pr-Y component video inputs Factory settingsConnections rear side of the device Welcome Info display and TV index Operating convenience with wizardsWizards in overview Proper use and environmental conditions For your safetyPower supply Air circulation and high temperaturesSupervision Repairs and accessoriesVolume CleaningConnecting the TV set Initial installationInstalling the TV set Preparing the remote control unitTurning the set on/off First installation wizardDVB-S line Antenna/cable analogue analogue stations viaCall TV menu Explanation of the setting possibilitiesPositioning/aligning DVB-T antenna Explanations of the DVB-T antennaInfo display Operating convenienceGeneral information on menu operation Assist+ menu Index in the TV setLanguage Miscellaneous TV menu Overview diagramParental lock Timer functions Select provider Station selection Data capture Radio menu Overview diagramSwitch on TV when marked Newsflash Reveal Switch on TV when marked SettingsSelect station Daily operationSelect video source Adjusting the sound Operation without remote control Adjusting the pictureButton functions Yellow button Time selection Blue button Explanations of the symbols for sound identificationStatus display Additional selection possibilities for DVB stationsTV stations Search/update stations Search wizardExplanations of some search settings Managing stationsInput of the station colour standard Search/update station manual searchGo to the menu line below 34Select Stations Station3456or numeric buttons Change, delete, move, rename, restore stationsRestore stations Green button Starts Restore stationsPut together / change favourites lists Picture in Picture PIP Picture in PictureConfigure Picture in Picture PIP mode Electronic Programme Guide EPG Electronic Programme GuideConfiguring EPG Teletext TeletextDigital Teletext MHEG-5 Teletext menuConditional Access Module CA module Software update Radio Radio modeCall TV menu 34Select Connections Connecting additional devices to the TV setOperating additional equipment Device connection wizardManual recorder station search Explanations of important settingsConnecting antenna to the DVD/video recorder Connection possibilities for a DVD/video recorderConnecting devices to the PC in connection and playback OK calls the wizard Digital audio signalSockets 34Select New devices/modificationsIntegrated Dolby Digital Decoder Sound components wizardSwitch off all devices before connecting SetupConnecting Adjusting the speaker system 34Select Configuration/modification Distance to left front speaker OK continue to Adjust speaker levelOK continue to Subwoofer phase OK continue to setConnecting analogue audio amplifiers Connecting audio amplifiersExplanations of the setting possibilities Connecting digital audio amplifiersRS-232C interface Assignment of the digital audio inputAudio connection in Hdmi DVI devices Direct way to record Timer recording with external devices Viewing photos PhotoViewerStarting the PhotoViewer Ending the PhotoViewerCalling the PhotoViewer menu Open folderMarking photos for slide show Starting a slide showOperating Loewe equipment Functions for the Loewe DVD player Auro 2216 PS, 8116 DT ViewVision DR+ Timeshift ModeRotating the TV set Troubleshooting Button Connection diagramWith Teletext various character sets are AmplifierConnections Technical dataGeneral data Electrical dataSetup possibilities AccessoriesAccessories CI slot See Common Interface Conditional Access Module See CA moduleGlossary Cinch cable Cable for transmitting audio or videoPicture in Picture see PIP JPG See JpegLCD Liquid Crystal Display HD digital TV analogueTV digital HD analogueIndex Palmer Street Service
Top Page Image Contents