Loewe 32959022 Explanations of important settings, Connecting antenna to the DVD/video recorder

Page 38

Operating additional equipment

Explanations of important settings

Signal type

The signal type of the devices that can be connected can

 

vary greatly. If you are not sure, leave the setting for Signal

 

on Automamtic CVBS/YC (e.g. for DVD Player/Recorder) or

 

Autom.-VHS/SVHS(e.g. video recorder), otherwise select

 

the right signal type. See the glossary on page 59 for

 

further information.

Immediate

If the picture from a connected device is to be displayed

playback

immediately on the TV set during playback, select yes. A

 

switching voltage is allowed so that you do not have to

 

switch over manually to see the picture of the connected

 

device. (See the operating manual of the connected re-

 

production device.)

 

When playing from Digital Link Plus devices, the picture is

 

always displayed immediately, regardless of the setting.

Assign digital

Select the AV socket to which the device of which you

audio input

want to hear the digital sound is connected. Connect the

 

digital output of the external device to the digital input

 

of the TV set (see page 47). If a device with digital audio

 

is not connected then select no.

Connection possibilities for a DVD/video recorder

There are two possibilities for viewing the picture of the connected recorder:

1.Use appropriate cables in conjunction with the connections assigned by the connection wizard. This always offers the best quality and the greatest convenience, such as automatic switch over when playing from a connected device.

2.You are using the antenna connection between recorder and TV device. However this reduces the quality.

Connecting antenna to the DVD/video recorder

If you want to receive and record analogue stations, it is useful to loop the recorder into the antenna cable; as shown in the connection example on page 37 bottom right.

If the antenna connection is also used for the playback because the devicers are not connected by EURO-AV cables, you have to search for the recorder station and save it in the TV set.

Proceed as follows (see also the operating manual of the connected recorder):

Insert a DVD/cassette and press play.

Call AV selection.

34Select VIDEO, OK to switch over.

If no picture is visible on the TV screen when playing the recorder, search for the recorder station automatically or set it manually.

To make sure no "normal" TV stations are found in the station search, pull the antenna plug out of the recorder antenna input temporarily (the cable to the antenna system).

Manual recorder station search:

VIDEO is selected by the AV selection.

Call TV menu.

34Select Settings,

6 go to the menu line below.

34Select Stations,

6go to the menu line below.

34Select Manual adjustment, OK to call other settings.

For Channel enter "E30". Blue button: Start search.

When you have found the recorder station: Red button: Overwrite station slot.

Exit TV menu.

Re-connect the antenna plug that you temporarily unplugged.

If disturbances should now occur because a TV station is being broadcast on the same channel as the station of the recorder, then you must change the transmission channel on the recorder and scan for the recorder again on the TV set.

- 38

Image 38
Contents Operating instructions Contents Remote Control TV Functions Button M Control unit front side of the deviceOn/Off button DisplaySD/HD-COMPONENT in Cb/Pb-Cr/Pr-Y component video inputs Factory settingsConnections rear side of the device Welcome Info display and TV index Operating convenience with wizardsWizards in overview Air circulation and high temperatures For your safetyPower supply Proper use and environmental conditionsCleaning Repairs and accessoriesVolume SupervisionPreparing the remote control unit Initial installationInstalling the TV set Connecting the TV setFirst installation wizard Turning the set on/offAntenna/cable analogue analogue stations via DVB-S lineExplanations of the DVB-T antenna Explanation of the setting possibilitiesPositioning/aligning DVB-T antenna Call TV menuInfo display Operating convenienceGeneral information on menu operation Index in the TV set Assist+ menuLanguage Miscellaneous TV menu Overview diagramParental lock Timer functions Newsflash Reveal Switch on TV when marked Settings Radio menu Overview diagramSwitch on TV when marked Select provider Station selection Data captureDaily operation Select stationSelect video source Adjusting the sound Adjusting the picture Operation without remote controlButton functions Additional selection possibilities for DVB stations Explanations of the symbols for sound identificationStatus display Yellow button Time selection Blue buttonManaging stations Search/update stations Search wizardExplanations of some search settings TV stationsStation Search/update station manual searchGo to the menu line below 34Select Stations Input of the station colour standardGreen button Starts Restore stations Change, delete, move, rename, restore stationsRestore stations 3456or numeric buttonsPut together / change favourites lists Picture in Picture Picture in Picture PIPConfigure Picture in Picture PIP mode Electronic Programme Guide Electronic Programme Guide EPGConfiguring EPG Teletext TeletextTeletext menu Digital Teletext MHEG-5Conditional Access Module CA module Software update Radio mode RadioDevice connection wizard Connecting additional devices to the TV setOperating additional equipment Call TV menu 34Select ConnectionsConnection possibilities for a DVD/video recorder Explanations of important settingsConnecting antenna to the DVD/video recorder Manual recorder station searchConnecting devices to the PC in connection and playback 34Select New devices/modifications Digital audio signalSockets OK calls the wizardSound components wizard Integrated Dolby Digital DecoderSwitch off all devices before connecting SetupConnecting Adjusting the speaker system 34Select Configuration/modification OK continue to set OK continue to Adjust speaker levelOK continue to Subwoofer phase Distance to left front speakerConnecting digital audio amplifiers Connecting audio amplifiersExplanations of the setting possibilities Connecting analogue audio amplifiersRS-232C interface Assignment of the digital audio inputAudio connection in Hdmi DVI devices Direct way to record Timer recording with external devices Ending the PhotoViewer PhotoViewerStarting the PhotoViewer Viewing photosStarting a slide show Open folderMarking photos for slide show Calling the PhotoViewer menuOperating Loewe equipment ViewVision DR+ Timeshift Mode Functions for the Loewe DVD player Auro 2216 PS, 8116 DTRotating the TV set Troubleshooting Amplifier Connection diagramWith Teletext various character sets are ButtonElectrical data Technical dataGeneral data ConnectionsSetup possibilities AccessoriesAccessories Cinch cable Cable for transmitting audio or video Conditional Access Module See CA moduleGlossary CI slot See Common InterfacePicture in Picture see PIP JPG See JpegLCD Liquid Crystal Display HD analogue TV analogueTV digital HD digitalIndex Service Palmer Street