one user defined options. These are User, Classic, Jazz, Rock, Pop and Flat. The pre- defined options can not be changed by the user. If you want to change one of the fre- quency values of the predefined options, the Mode must be switched to User option.
The 5 items below the Mode are available to a d j u s t t h e s o u n d s e t t i n g s i n 5 frequency values: 120 Hz, 500 Hz, 1.5 kHz, 5 kHz and 10 kHz. To change the values of 5 frequency options, select one of the op-
tions by “
” or “
” button, and then press
“
” to increase the value, or “
” to de- crease the value. In mid position, cursor is displayed with one arrow.
To store the Equalizer settings, press “
” or
“
” button or directly press “MODE” button on “Store” option.
During the store process all the items are stored, moreover, the User mode informa- tion would not be lost. In other words, when the user mode is selected again, after stor- ing the Mode with one of the predefined op- tions, the user defined frequency values would be set.
Setting AVL
•Using “
” or “
” button select AVL.
•Pressing “
” or “
” button will turn on and off this feature.
Automatic Volume Limiting (Avl) function normalises sound to obtain fixed output level between programmes, having different sound levels.
To Store the Settings
•When the cursor is on any item which has no
or,
•Press “
”, “
” or “MODE” button on “Store” option to store Sound menu settings.
Picture Menu
•To enter the Picture menu directly, press the Green (
) button, or
•Press "MENU" button, now you are in main menu. In the Main menu, select “Picture”
using “
” or “
” button, then enter the Pic-
ture menu pressing “
” / “
” or “MODE” button.
Setting Brightness
•As you enter the picture menu, Brightness will be the first item.
•Press “
” button to increase brightness.
•Press “
” button to decrease brightness.
- 45 -