Programme Menu

Setting VCR ( Video Cassette Recorder ) Mode

•This item can be seen in TV, AV-1, AV-2, AV-3, S-VIDEO modes.

•If you want to watch a VCR source from one of these modes, then it will be better to set VCR mode “on”. For this, while the cursor is

on this item press the “” or “” buttons to set it “On”.

•If you want to watch a DVD , then you must set this item “off”; because DVD is not a source like a VCR and to see the picture better, you must set the VCR mode “Off”.

To Store Settings

•Press “MODE” button on the remote control to store the settings directly.

or,

•Press “”, “” or “MODE” button on Store option to store Install menu settings.

•To enter Programme menu directly, press the „“ button in TV mode, or

•Press "MENU" button, now you are in main menu. In the main menu, select “Program.” using “” or “” button. Then enter the

Programme menu, press “ ” / “” or “MODE” button.

Moving cursor to four direction you can reach 20 programmes in the same page. By scrolling the pages up or down by pressing the navigation buttons you can select all the programmes in TV mode (except the AV mode).

By cursor action, programme selection is done automatically. In order to select programme is also possible by using digit

or double-digit button. In this way program- me selection gets also automatically. The TV Status is changed by the programme se- lection too. When using double-digit button in order to select a programme, the Programme Number in TV Status OSD is displayed in " --" form, and by pressing digit buttons they are displayed in it.

Programme Number is between 00 and 99. Programme Name has a name string with 4 characters. After autostore process the Pro- gramme Names are set to:

•Channel search "C-01" or "S-01" (band and channel number) or name of the tuned

channel if'HOHWH1DPHdefined.		$XWRVWRUH,QVHUW

At the bottom of the menu there is a pro- gramme sort functions section. Each func- tion is activated by color button (seen above). Name allows changing the pro- gramme name. By Delete you can delete programmes that you decided. Insert sec- tion is for inserting programmes into an- other programme spaces. By selecting Autostore section, Autostore menu will be available.

Name:

To change the name of a decided program- me, that programme is selected and

pressed to the Red ( ) button (Name). The first letter begins to blink on the se- lected name. To change that letter “” or “” button can be used, and to select the

other letters, “” or “” button can be used. If the cursor is at the last letter of the

- 49 -