Metz 20 TK 51 operating instructions Other Features

3&6$9￿￿￿9,'(2

Other Features

TV Status

Programme Number, Programme Name (or AV), (they are displayed on the upper left of the screen) and Sleep Timer (shows the time left on the upper right screen if en- abled). The sound indicator and picture mode are displayed with them too. They are displayed after programme change during 3 seconds.

Programme Number

Programme Name (4 characters)

These OSD’s are displayed when a new programme is entered by digit button or by

pressing “ ”, “P-”, “P+”, “TV”, “AV” button.

Programme Swap ( )

This button is used to reenter to the preced- ing entered programme again. Pressing

"" consecutively allows to swap into two last entered programmes.

Double-digit (- -)

This OSD is displayed when the "Double- Digit" button pressed in place of the pro- gramme number indicator.

After then, in order to enter a programme it must be pressed to two digit consecutively. When it is late to press any digit button this function will be ignored and the display will be erased. In the same way it must not be

late to press any digit button after entering the first digit. The limit of the delay time is 3 seconds.

Personal Preferences ( )

All the preset values will be restored, when

pressing " ".

Sound Indicator

The alternatives of the indicator are Mono, Stereo, Dual I and Dual II. This indicator is displayed under the programme number in- dicator on the screen. "I-II" button is used to select Mono or Stereo, or Dual I or Dual II.

In Mono broadcast or in forced-mono (for stereo broadcast).

In Stereo broadcast.

If dual broadcast detected. Dual I is selected in default and also can be selected after Dual II by Remote Control.

If Dual II selected by Remote Control.

Picture Mode

Picture mode OSD is displayed when “” button is pressed. Picture mode can be changed to Auto, 4:3 or 16:9 by pressing “” button.

Sleep Timer Indicator

It is displayed on the upper right of the screen when a new programme is entered

by digit button or by pressing “ ”, “P-”, “P+”, “TV”, “AV” button. If sleep timer is acti- vated it is displayed with the TV status and erased with it after 3 seconds.

- 51 -