3&
To Store Settings
In Feature menu all settings are stored auto- matically.
Installation Menu
•To enter the Installation menu directly, press the Blue (
) button, or
•Press "MENU" button, now you are in main menu. In the main menu, select “Install.”
using “
” or “
” button. Then enter the In- stall menu pressing “
” / “
” or “MODE” button.
When any item is selected with “
” or “
” button in the install menu, the selected item will be highlighted on the bottom bar.
Changes by pressing “
” or “
” button will be result only at highlighted item on the bot- tom bar.
Selecting Programme
To select programme number, you can use
“
” or “
” button, Digit Buttons or The Double Digit button with digit buttons.
3&&
Selecting Band
Band, can be chosen either,
•“C” or “S” by “
” or “
” button. Selecting Channel
Channel can be changed by “
” or “
” but- ton, by Digit Buttons or by the Double Digit button with digit buttons.
For band C,
01 - 83,
For band S,
01 - 41.
Selecting Search
To start the search process, press “
” but- ton for forward search or “
” button for back- ward search. If a signal is found or reaches to end of the band after searching, press
“
” or “
” buttons to continue search pro- cess. To stop the search process when you
want, press “
” or “
” buttons again.
Selecting Fine Tuning
You can use the Fine Tuning process for fine adjustment (after coarse adjustment), if you are not happy about the image on the screen.
Use “
” or “
” button on Fine Tuning item, until getting the best image on the screen.
Normally the Fine Tuning cursor is placed next to the left side on the slider and this is indicated with one arrow.
- 48 -