Panasonic PV-V4622 operating instructions Record on a Tape, VCR Stop Pause Speed Slow REC

Page 15

Record on a Tape	*Important: If a remote control button does not work
Record on a Tape	the remote and try the button again.
	when pressed, press the VCR button on

Ready Checklist

All connections are made (p. 8, 10, 24). TV and VCR are plugged in.

TV is on and tuned to CH3, 4, or VIDEO.

Remote is in VCR mode. (Press VCR)

1 Insert a tape with a record tab (p. 4).

•VCR power comes on.

“VCR” lights on Multi Function Display. If Auto VCR/TV (p. 35) is set to “OFF,” press VCR/TV until “VCR” lights on the Multi Function Display.

VCR/

TV

STOP

PAUSE/	SPEED
PAUSE/
SLOW	CH
	CH
REC

Record using VCR controls

2 Select	1 Insert	4 Press REC
Channel.	a tape.	to start
		Recording.

Multi Function	5 Press STOP/
Display	EJECT to stop.

This video recorder, equipped with HQ (High Quality) system, is compatible with existing VHS equipment. Only use

tapes with the mark. Only tapes tested and inspected for use in 2, 4, 6, and 8 hour machines are recommended.

2 Press CH * or NUMBER keys to select the channel.

•For “LINE” input, see p. 36.

•For channel over 100, first press 100 key then the other 2 digits.

	Press SPEED		Basic Operation
	3 to select the record speed (p. 4).		Basic Operation
	3 to select the record speed (p. 4).
	SP = Standard Play	LP = Long Play
	SLP = Super Long Play

• Speed appears on-screen and on Multi Function Display.

4 Press REC

to start recording.

•To edit, press PAUSE/SLOW to pause, and again to resume recording.

5 Press STOP

to stop recording.

One Touch Recording (recording in progress),

•VCR shuts off after the preset record length. ➛ each press of REC adds 30 min. to the

recording length up to 4 hours.

Record one station, watch another,

➛press VCR/TV (“VCR” goes out on Multi Function Display),

➛select channels at TV (recording continues).

	Note	• Watching one channel and
	Note	recording another is NOT
		recording another is NOT
		possible when using a Cable
		Box or a Satellite Receiver.

Select channels at VCR,

•Other channels cannot be viewed during recording.

➛press VCR/TV (“VCR” lights up on Multi Function Display),

➛select channels at VCR.

Note	• After 5 min. in Pause mode, VCR
	stops to protect the tape and the
	video head.

15

Image 15

Contents Operating Instructions Model No. PV-V4622 Video Cassette RecorderLSQT0509B Do not place unsecured equipment on a sloping surface Serious injury to a child or adult and damage to the unitIf an outside antenna or cable system is connected to Safety Precautions Congratulations Before UsingTable of Contents Remote control Buttons Location of ControlsFront View of the VCR Rear View of the VCR Multi Function DisplayFrom ANT./CABLE How to ConnectDoing Initial Setup Ready to Play Plugging the AC Power Plug into an AC outletPress Action to start clock, and go to above left Manual Clock SetSELECT/ SET Play ActionOUT to TV Terminal on TV using the RF Cable included accessoryTerminal on the VCR with the RF Cable Tvvcr VHF/UHFVCR TV Press To set Select Connection screen isDisplayed Press To select connection Clock Reset Language, Channels, Clock Language ChannelsPress Action VCR’s Output ChannelVCR’s Output ChannelEject Play Ready ChecklistPlayback using VCR controls Playback a TapeVCR Stop Pause Speed Slow REC Record on a TapeTimer Recording Review, Replace or Clear Program Contents VCR Plus+ System is Auto VCR Plus+ System Channel Setup PartFor VCR-TV or VCR-cable box-TV connection only Press Or Action toAfter 900 AM the next day Manual VCR Plus+ Channel Setup To enter VCR Plus+ channelsPress Action twice VCR Plus+ System Programming ProgramPress Number keys Multi-Brand Control Feature Multi-Brand Control SetupUsing Multi-Brand Control 29, 09, 01, 63, 120, 44, 42 Sylvania15, 16 44, 06, 01, 120, 05, 63Connect With Two Cable Boxes Advanced ConnectionsAudio/Video Connection With a Cable Box VCR Cable BoxReceivable Broadcast Types Audio Mode for RecordingAudio Mode for Playback ConnectionPress Action again SET UP Commercial ADVTape Operation MarkingTo select C/A Playback and press to set Auto or Manual To select C/A and display SET UP Commercial ADVPlayback Play SELECT/ SETMost commonly asked questions about are answered below Question AnswerTo Search for Preview When the movie is foundSearch System Index SearchProgram End Search Zero Search Repeat PlayAuto Operation Functions Manual Caption Special VCR FeaturesPreset Caption Channel CaptionTo turn on Remote Warning ON/OFF FeatureVCR Lock Feature Action ADD/ DLTTape Position and Tape Status Feature Time Stamp FeatureShuttle Variable Speed Search Auto Shut-Off FeatureWeak Signal Display ON/OFF Feature VCR/TV Selector FeatureFront of VCR To Monitor Dubbing on Your TV Selecting the Input ModeCopying Your Tapes Dubbing Playing Source VCR Recording Editing VCRFeatures for a Quality Picture Head CleaningCleaning the VCR SpecificationsVCR Status & Clock Displays Function & Channel Displays Blank Tape/ No Video SignalOn-Screen Displays OSD IndicationsCheck if a tape is already in the unit Before Requesting ServiceLimited Warranty Limited WarrantyCustomer Services Directory Limited Warranty Limits And ExclusionsAs of April Para Ant/Cable VCR TV Presione PROG/VCR+ Presione Power off para ajustar el temporizadorInserte un cassette Presione Play para liberarOne Panasonic Way Secaucus, New Jersey Index