Panasonic PV-V4622 Playback a Tape, Ready Checklist, Playback using VCR controls, Eject Play

Page 14

Playback a Tape

Ready Checklist

All connections are made (p. 8, 10, 24).

TV and VCR are plugged in.

TV is on and tuned to CH 3, 4, or VIDEO.

Remote is in VCR mode. (Press VCR)

EJECT

PLAY

REW FF

STOP

PAUSE/

SLOW

Playback using VCR controls

1 Insert a tape.

2 Press PLAY.

Multi Function Display

Press STOP/EJECT to stop and/ or eject tape.

Note

Remove loose or

peeling labels from tapes to prevent tape jam.

1 Insert a tape,

• VCR power comes on. “VCR” lights on Multi

Function Display. If Auto VCR/TV (p. 35) is set to “OFF,” press VCR/TV until “VCR” lights on the Multi Function Display.

2 Press PLAY to play tape.

• If tape has no rec. tab (p. 4), auto play begins.

Special Features During Play

Forward/ Reverse scene search

➛Press FF or REW.

➛Press PLAY to release.

After search has begun, each additional press of FF or REW changes speed as shown below.

[SLP] : Approx. 21X			↔ Approx. 43X
[LP]	: Approx.	9X	↔ Approx. 15X
[SP]	: Approx.	7X	↔ Approx. 13X

•If picture is interrupted at 43X, 15X, or 13X speed, speed changes to 21X, 9X, or 7X.

•It may take a moment for 43X, 15X, or 13X search to start while tape condition is being determined.

•43X, 15X, or 13X search may not be possible with some tapes.

Notes

•Picture interruption may occur with some TVs.

•FF and REW search speed may vary depending on current tape position.

Still (Freeze) picture

➛Press PAUSE/SLOW.

➛Press PLAY to release.

Frame by Frame picture

➛Press PAUSE/SLOW in Still mode.

➛Press PLAY to release.

Slow Motion picture

➛Hold down PAUSE/SLOW in Still mode.

➛Press PLAY to release.

Notes

•These features work best in SP or SLP mode.

•The sound will be muted.

•To reduce picture noise, see “Manual Tracking Control” on page 37.

•After the VCR is in Still or Slow mode for 3 minutes, it will switch to Stop mode automatically to protect the tape and the video head.

3 Press STOP

to stop tape.

Rapid Rewind/ Fast Forward

(E.g., T-120 tape rewinds in approx. 1 minute.) Press REW or FF in Stop mode.

Notes

•Rewind or FF starts after VCR detects tape length. This may take a moment.

•Rew/ FF speed slows down at start and end portions of the tape.

Press EJECT on remote,

or STOP/EJECT on VCR to eject tape.

14	For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com

Image 14

Contents LSQT0509B Operating Instructions Model No. PV-V4622Video Cassette Recorder If an outside antenna or cable system is connected to Do not place unsecured equipment on a sloping surfaceSerious injury to a child or adult and damage to the unit Safety Precautions Before Using CongratulationsTable of Contents Front View of the VCR Remote control ButtonsLocation of Controls Multi Function Display Rear View of the VCRPlugging the AC Power Plug into an AC outlet How to ConnectDoing Initial Setup Ready to Play From ANT./CABLEAction Manual Clock SetSELECT/ SET Play Press Action to start clock, and go to above leftTvvcr VHF/UHF Terminal on TV using the RF Cable included accessoryTerminal on the VCR with the RF Cable OUT to TVPress To select connection Select Connection screen isDisplayed VCR TV Press To setChannels Reset Language, Channels, ClockLanguage ClockChannel VCR’s Output ChannelVCR’s Output Press ActionPlayback a Tape Ready ChecklistPlayback using VCR controls Eject PlayRecord on a Tape VCR Stop Pause Speed Slow RECTimer Recording Review, Replace or Clear Program Contents Press Or Action to Auto VCR Plus+ System Channel Setup PartFor VCR-TV or VCR-cable box-TV connection only VCR Plus+ System isAfter 900 AM the next day Press Action twice Manual VCR Plus+ Channel SetupTo enter VCR Plus+ channels Press Number keys VCR Plus+ System ProgrammingProgram Using Multi-Brand Control Multi-Brand Control FeatureMulti-Brand Control Setup 44, 06, 01, 120, 05, 63 Sylvania15, 16 29, 09, 01, 63, 120, 44, 42With a Cable Box VCR Cable Box Advanced ConnectionsAudio/Video Connection Connect With Two Cable BoxesConnection Audio Mode for RecordingAudio Mode for Playback Receivable Broadcast TypesMarking SET UP Commercial ADVTape Operation Press Action againPlay SELECT/ SET To select C/A and display SET UP Commercial ADVPlayback To select C/A Playback and press to set Auto or ManualQuestion Answer Most commonly asked questions about are answered belowWhen the movie is found To Search for PreviewProgram End Search Search SystemIndex Search Auto Operation Functions Zero SearchRepeat Play Channel Caption Special VCR FeaturesPreset Caption Manual CaptionAction ADD/ DLT Remote Warning ON/OFF FeatureVCR Lock Feature To turn onTime Stamp Feature Tape Position and Tape Status FeatureVCR/TV Selector Feature Auto Shut-Off FeatureWeak Signal Display ON/OFF Feature Shuttle Variable Speed SearchPlaying Source VCR Recording Editing VCR To Monitor Dubbing on Your TV Selecting the Input ModeCopying Your Tapes Dubbing Front of VCRSpecifications Head CleaningCleaning the VCR Features for a Quality PictureIndications Function & Channel Displays Blank Tape/ No Video SignalOn-Screen Displays OSD VCR Status & Clock DisplaysBefore Requesting Service Check if a tape is already in the unitLimited Warranty Limited WarrantyAs of April Customer Services DirectoryLimited Warranty Limits And Exclusions Para Ant/Cable VCR TV Presione Play para liberar Presione Power off para ajustar el temporizadorInserte un cassette Presione PROG/VCR+Index One Panasonic Way Secaucus, New Jersey