Panasonic PV-V4622 operating instructions Search System, Index Search, Program End Search

Tape Operation (continued)

Search System

For each recording, an invisible index mark is placed on the tape. A program index and information are also included for timer recordings. These marks are used to access or scan recordings.

Index Search

1			SEARCH
	INDEX		PROG. END	MOVIE
	ENTER	INDEX NUMBER :1
	USING	1- 9 KEYS
	FORWARD SEARCH :FF
	REVERSE SEARCH :REW
	NEXT	:SEARCH M/A SK I P
	EXIT	:STOP

Press SEARCH/ M/A SKIP* to

display SEARCH in Stop or Play mode, and then

Program End Search

Locates end point of recording for continuity.

1 Press SEARCH/ M/A SKIP twice to display SEARCH in Stop or Play mode.

press NUMBER keys to select recording number.

•To calculate number, see below.

Press FF or REW on the remote to start search.

2		SEARCH		Press FF on the
	INDEX	PROG. END	MOVIE	remote to start
				PROGRAM END
	SEARCH START :FF			SEARCH.
	NEXT	:SEARCH M/A SK I P		• To cancel, press
	EXIT	:STOP		PLAY or STOP.

Examples of Program End Search.

2 INDEX SEARCH

FORWARD SEARCH : FF

REVERSE SEARCH : REW

Play begins at end of search.

To search forward or back 1 index, press FF or REW

Fig. 1

Program 1

the current tape position Press SEARCH button

FF

INDEX Program 2 or BLANK

End Point

on the remote or	Fig. 2
VCR while screen
left is displayed (10	INDEX	Program 1	BLANK	INDEX	Program 2	BLANK
sec.).
			the current tape position
			Press SEARCH button

• To cancel, press		End Point
	FF
PLAY or STOP.

To Calculate Index Number						Fig. 3		the current tape position
								Press SEARCH button
Example 1:						INDEX	Program 1		BLANK	Program 2
To go to rec. 2 from rec. 4, enter 3 and press REW.										If search exceeds
						End Point
									FF	a few seconds in
1	2	3	4	5	6	7				BLANK area.

Example 2:

To go to rec. 6 from rec. 2, enter 4 and press FF.

1 2 3 4 5 6 7

Upon locating end point,

➛search continues 7 sec. past end point,

➛tape rewinds to 10 sec. before end point,

➛tape plays to end point and stops.

NOTE: indicates start points of each recording.

Note

•If Index Search is started very close to an index mark, that index mark may not be counted in the search.

Note

•If Program End Search is started very close to an index mark, that mark may be skipped over.

30 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com