Panasonic PV-V4622 Connection, Receivable Broadcast Types, Audio Mode for Recording

MTS Broadcast/ VHS Hi-Fi Stereo System

Connection

Make the Audio/Video Connection as shown on the previous page.

•You can use a TV connected to a Stereo amplifier and speakers instead of a Stereo TV.

R

L

VHF/UHF

TV

VCR

AUDIO OUT

R

L

OUT TO TV

Stereo Amplifier

R	AUDIO IN
	L

Receivable Broadcast Types

The following are possible audio broadcast types and on-screen displays. The signal being received is indicated with an “ ” mark while the selected audio mode is indicated with an arrow.

To display the broadcast signal being received,

➛press DISPLAY.

MTS Stereo and SAP broadcast

Multi-channel Television Sound Stereo (main language) and Secondary Audio Program (sub language) broadcasts are being received simultaneously. Select STEREO or SAP audio mode.

MTS Stereo broadcast

Multi-channel Television Sound Stereo broadcast. Select STEREO audio mode.

•If stereo broadcast is weak and display flickers, select MONO audio mode for possibly better results.

STOP	12 : 0 0AM	ABC
STEREO		0 : 00 : 00
		SP
SAP
MONO
STOP	12 : 0 0AM	ABC
STEREO		0 : 00 : 00
		SP
SAP
MONO
STOP	12 : 0 0AM	ABC
STEREO		0 : 00 : 00
		SP
SAP
MONO

DISPLAY

SAP/Hi-Fi

Equipped with ®-TV Noise

SAP broadcast

Secondary Audio Program (sub language)
broadcast. Select SAP audio mode for the	STOP 12 : 0 0AM	ABC
sub language.	STEREO	0 : 00 : 00
		SP
MONO broadcast	SAP
	MONO
Normal monaural sound broadcast.

Reduction for true MTS

reproduction. ®-TV Noise Reduction is required for good stereo separation and audio

fidelity. ® is a registered trademark, and is licensed by

® Technology Licensing.

Audio Mode for Recording

1 Press SAP/ Hi-Fi

to display audio mode.

(Display disappears after 5 seconds.)

Audio Mode for Playback

1 Start playback. See page 14.

2 Press SAP/ Hi-Fi

2 STEREOSAP MONO

Press SAP/ Hi-Fi repeatedly to select desired mode.

to display audio mode.

(Display disappears after 5 seconds.)

•Arrow indicates selection.

•Refer to “Receivable Broadcast Types” above.

3 HH II FF II :: LL/R

H I F I : R

NORMAL

Press SAP/ Hi-Fi repeatedly to select desired mode.

• Select “HIFI(L/R)” or

3 Do a recording. See page 15.

Notes

•Arrow indicates selection.

“HIFI(L)” or “HIFI(R)”

to listen to stereo

recordings in stereo

sound. Select

“NORMAL” for

monaural sound.

•Only tapes recorded in Hi-Fi stereo will playback with true stereo sound. Standard stereo tapes will playback in monaural sound.

•To listen to Hi-Fi stereo playback, the VCR AUDIO (L/R) jacks must be connected to a stereo TV or an external stereo amplifier and speakers. (See top of this page.)

•If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio.

• Hi-Fi and normal audio playback volume level may differ. 25