VCR & Cassette Information
Head Cleaning
Playing older or damaged tapes may eventually cause video heads to become clogged.
Video Head Clog Sensor
During playback, this |
|
|
| |||
screen appears if | V I DEO HEADS MAY | |||||
clogging is detected. | NEED CLEAN I NG | |||||
PLEASE I NSERT HEAD | ||||||
To remove screen, | CLEAN I NG CASSETTE | |||||
OR REFER TO MANUAL | ||||||
press PLAY on the | END : PLAY | |||||
remote or VCR. | ||||||
|
|
| ||||
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
Cleaning Tape
•Use “dry” type head cleaning cassette only. (Part No.
•Follow cleaning tape instructions carefully. Excessive use of tape can shorten head life.
•If head clog symptoms persist, contact your nearest Factory Servicenter or authorized Servicenter. (See page 41.)
Cleaning the VCR
Use a soft cloth or dusting attachment of a vacuum cleaner to remove dust from the ventilation holes on the back sides and bottom of the cabinet.
Plastic surfaces are easily scratched and can be marred by alcohol and various solvents. Avoid excessive use of
We recommend using a nonabrasive, antistatic cleaner and polisher.
Specifications
Power Source: | 120 V AC, 60 Hz |
Power Consumption: Power On | |
| Approx. 23 watts |
| Power Off |
| Approx. 3.0 watts |
Video Signal: | EIA Standard NTSC color |
Video Recording System:4 rotary heads helical | |
| scanning system |
Audio Track: | 1 track (Normal) |
| 2 channel |
| Sound) |
Tuner:
Broadcast Channels: VHF 2 ~ 13, UHF 14 ~ 69
CABLE Channels: Midband A through I (14 ~ 22) Superband J through W (23 ~ 36) Hyperband AA ~ EEE (37 ~ 64)
Lowband
Special CABLE channel 5 A (01)
Ultraband 65 ~ 94, 100 ~ 125
Operating Temperature: 5 °C ~ 40 °C (41 °F ~ 104 °F)
Operating Humidity: 10 % ~ 75 %
Weight:2.7 kg (6.0 lbs).
Dimensions:430 (W) x 98 (H) x 242 (D) mm
Note: Designs and specifications are subject to change without notice.
Features for a Quality Picture
Digital Auto Picture
Automatically controls the video output signal for less noise depending on the tape condition.
Digital Auto Tracking
Continuously analyzes the signal and adjusts for optimum picture quality.
Manual Tracking Control (to reduce picture noise)
Use during Playback and Slow Motion mode to reduce picture noise.
Press CH (TRACKING) 
/ 
on the remote control or VCR until the picture clears up.
To return to Auto Tracking, press POWER off, then on again a few seconds later.
R |
| R |
| |
R | R | R | R | |
R | R | |||
|
|
In Still mode, CH (TRACKING) 
/ 
operate as a
For Your Information
37