OPERATING INSTRUCTIONS

POST OPERATION CHECKLIST

Check Battery Condition and recharge, if necessary.

1.Check all flaps for wear, damage and adjustment.

2.Drain and clean recovery tank.

3.Clean recovery tank screen and float.

4.Check scrub brushes for wear or damage.

5.Check rear and side squeegee for wear, damage and adjustment.

6.Clean the debris in hopper

7.Check main and side broom for wear or damage.

DRAIN HOSE PLUG

DRAIN HOSE

DRAIN HOSE PLUG

DRAIN HOSE

Fig. 42

Fig. 43

 

TO DRAIN RECOVERY TANK

PLACE HOSE OVER DRAIN

Fig. 44

WHEN REPLACING DRAIN HOSE CLIP ON DRAIN HOSE PLUG

FACES OUT

Fig. 45

TO DRAIN RECOVERY TANK

The drain hose for the recovery tank is located on the back of the machine. To drain the tank, remove and lower the hose and place in a suitable floor drain as shown in figure 44. Open the drain hose plug as shown in figure 42 and 43.

IMPORTANT

Improper discharge of wastewater will damage the environment and is illegal. The U.S. Environmental Protection Agency has established certain regulations regarding discharge of wastewater. The local city and state regulations regarding wastewater discharge may be in effect in your area. Understand and follow the regulations in your area. Be aware of the environmental hazards associated with the substances you dispose of.

AMERICAN-LINCOLN

1-39

SMART

 

Page 39
Image 39
Nilfisk-ALTO 692003 manual Post Operation Checklist, To Drain Recovery Tank