MAINTENANCE

MAIN BROOM ACCESS DOOR

Fig. 81

MAIN BROOM ACCESS DOOR

The main broom access door is located in front of the left side tire of the machine as shown in figure 81. The door provides access to the main broom for service or inspection. The hopper must be raised to access.

WARNING

Engage hopper safety arm while accessing the main broom

BROOM LIFT ARM KNOBS

BROOM LIFT ARM WITH KNOBS REMOVED

Fig. 82

Fig. 83

REPLACING THE MAIN BROOM

The Main Broom should be replaced when the bristles become worn to less than 1 1/2”. The main broom is held in place by the right side broom door. This feature provides for easy removal and installation of the main broom without the need for special tools or equipment. Lift the hopper to gain access to the main broom compartment. Loosen the main broom access door knob and open the main broom access door. Rotate and remove the broom lift arm knobs counterclockwise to the left as shown in figure 82 and 83.

1-54

AMERICAN-LINCOLN

 

SMART

Page 54
Image 54
Nilfisk-ALTO 692003 manual Main Broom Access Door, Replacing the Main Broom